- Apr 28, 2021
-
-
Import cvmx-pip-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by:
Aaron Williams <awilliams@marvell.com> Signed-off-by:
Stefan Roese <sr@denx.de>
-
Import cvmx-pepx-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by:
-
Import cvmx-pemx-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by:
-
Import cvmx-pcsx-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by:
-
Import cvmx-pciercx-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by:
-
Import cvmx-pcieepx-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by:
-
Import cvmx-npi-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by:
-
Import cvmx-mio-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by:
-
Import cvmx-l2c-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by:
-
Import cvmx-ipd-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by:
-
Import cvmx-gserx-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by:
-
Import cvmx-gmxx-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by:
-
Import cvmx-fpa-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by:
-
Import cvmx-dtx-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by:
-
Import cvmx-dpi-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by:
-
Import cvmx-dbg-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by:
-
Import cvmx-ciu-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by:
-
Import cvmx-bgxx-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by:
-
Import cvmx-asxx-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by:
-
Import cvmx-agl-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by:
-
Import misc cvmx-helper header files from 2013 U-Boot. They will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by:
-
Stefan Roese authored
This will be used by the upcoming Serdes and driver code ported from the original 2013 U-Boot code to mainline. Signed-off-by:
-
- Apr 24, 2021
-
-
Tom Rini authored
Bump our py version to 1.10.0 to address CVE-2020-29651. Reported-by: GitHub dependabot Reported-by:
Ley Foon Tan <ley.foon.tan@intel.com> Signed-off-by:
Tom Rini <trini@konsulko.com>
-
https://source.denx.de/u-boot/custodians/u-boot-videoTom Rini authored
- search for additional detailed timings in the EDID extension block - rework sunxi DE2 driver and accompanying DW-HDMI platform driver to drop redundant device specific code, and later use the DT as a source of information
-
https://source.denx.de/u-boot/custodians/u-boot-efiTom Rini authored
Pull request for efi-2021-07-rc1-3 Documentation fixes UEFI bug fixes: * error handling for capsule updates
-
Currently DE2 driver uses functions which are defined in internal headers. They are not meant to be used outside of uclass framework. Switch DE2 driver to public ones. This has additional benefit that device_probe doesn't need to be called manually. Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by:
Andre Przywara <andre.przywara@arm.com> Signed-off-by:
-
There is no real need to read source_id at probe time. It also doesn't make sense to store it in driver private data since it's already stored in class platform data. While this looks like cleanup (and it is), it's also important for DE2 driver rework because this info will be filled later (after probe is already executed). Signed-off-by:
-
TV driver was never fully implemented. Remove search for it from DE2 driver. Reviewed-by:
-
No Allwinner board with DW-HDMI controller use separate I2C bus for EDID read. Remove that check. Reviewed-by:
-
It turns out that there are two ways how hot plug detection can be done. One is standard way for DW HDMI controller - checking bit 2 in 0x3004 register. Another way is applicable only to Allwinner custom PHY - by checking bit 19 in register 0x10038. Both methods are equally good as far as we know. Use standard method in order to reduce amount of custom code. Reviewed-by:
-
One of my monitors have only 4k@60 timing in base EDID block which is out of range for devices with HDMI 1.4. It turns out that it has additional detailed timings in CTA-861 Extension Block and two of them are appropriate for HDMI 1.4. Add additional search for valid detailed timing in extension block. Signed-off-by:
-
Code which searches for valid detailed timing entry will be used in more places. Extract it. No functional change is made. However, descriptors are casted to edid_detailed_timing instead of edid_monitor_descriptor. Descriptor can be of either type, but since we're interested only in DTD, it is more fitting to cast to edid_detailed_timing. Reviewed-by:
-
When searching for detailed timing in EDID, check for digital display earlier. There is no point parsing other parameters if this flag is not present. Reviewed-by:
-
Currently driver accepts all resolution which won't work on 4k screens. Add validation callback which limits acceptable resolutions to 297 MHz. Reviewed-by:
-
commit cbea241e("efidebug: add multiple device path instances on Boot####") slightly tweaked the efidebug syntax adding -b, -i and -s for the boot image, initrd and optional data. The pytests using this command were adapted as well. However I completely missed the last "" argument, which at the time indicated the optional data and needed conversion as well. This patch is adding the missing -s flag and the tests are back to normal. Fixes: cbea241e("efidebug: add multiple device path instances on Boot####") Signed-off-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviwed-by:
Heinrich Schuchardt <xypron.glpk@gmx.de>
-
In case of failure at efi_get_variable_int("BootOrder"), we should skip examining boot option variables and return an appropriate error code which is the one the function returned. Fixes: CID 331153 Code maintainability issues (UNUSED_VALUE) Signed-off-by:AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by:
-
Indicated by Coverity Scan CID 331147 The ESRT was being refreshed in situations where the UpdateCapsule procedure failed. In that scenario: 1) the ESRT refresh was superfluous. 2) a failed ESRT refresh return code overwrites the UpdateCapsule error return code. This commit ensures that the ESRT is only refreshed when the UpdateCapsule performs successfully. CC: Heinrich Schuchardt <xypron.glpk@gmx.de> CC: Sughosh Ganu <sughosh.ganu@linaro.org> CC: AKASHI Takahiro <takahiro.akashi@linaro.org> CC: Tom Rini <trini@konsulko.com> CC: Andre Przywara <andre.przywara@arm.com> CC: nd@arm.com Signed-off-by:
Jose Marinho <jose.marinho@arm.com> Reviewed-by:
-
Bumping the digest list count, for all supported algorithms, can be calculated outside of the individual switch statements. So let's do that for every loop iteration instead and simplify the code a bit. Signed-off-by:
-
Heinrich Schuchardt authored
To avoid diverging function definitions we need to include efi_loader.h. Fixes: fe179d7f ("efi_loader: Add size checks to efi_create_indexed_name()") Signed-off-by:
-
Due to copy-paste error, two of the setexpr arguments were missing. Add the missing arguments. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com> Reviewed-by:
-
