- Jan 27, 2021
-
-
Typically in TPL/SPL the bloblist is quite small. But U-Boot proper may want to add a lot more to it, such as ACPI tables. Add a way to expand the bloblist by relocating it in U-Boot proper, along with the other relocation activities. Signed-off-by:Simon Glass <sjg@chromium.org>
-
It is useful to be able to figure out which phase we are loading next and which phase we came from. Add some functions to handle this as well as returning the name of a phase. This allows messages like "Booting to x" where x is the next phase. At present, TPL says 'Jumping to U-Boot' at the end, when in fact it is jumping to SPL. This is confusing, so use the new functions to correct this. Tests for this will come with an upcoming minor SPL test refactor. Signed-off-by: -
In the function rsa_verify_hash, if the "main" key doesn't work, u-boot try others keys. But it searches those keys in the FIT image instead of the u-boot device tree. Signed-off-by:
Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by:
-
This patch completely removes CONFIG_PCI_ENUM_ONLY from the PCI code as it is not configured for any board (any more). With this removal, some PCI related files get cleaned up a bit. Additional, dm_pciauto_setup_device() is now static, as it's not referenced from any code outside of this C file. Signed-off-by:
Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by:
-
In fit_config_verify_sig(), when no 'signature*' subnode exists in the configuration node, the fdt_for_each_subnode() loop is a no-op. Therefore, no error flags are set, and 'err_,sg' is not populated with an error string. This is incorrect behavior. Populate err_msg to indicate that no 'signature' is found, before entering the loop. The first call to fit_image_verify_sig() will override clear err_msg, or set it to a more specific message. Signed-off-by:
Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by:
-
Signed ARM_SMCCC_FAST_CALL value is shifted to 31'st bit. Then, it is expanded to 64 bit value, which results in 1s in higher 32 bits. This causes corrupted values in 64-bit SMC IDs and issues in buggy handlers of 32-bit calls. We need to make ARM_SMCCC_FAST_CALL unsigned long, so it would work properly on 32 bit architectures. Signed-off-by:
Volodymyr Babchuk <volodymyr_babchuk@epam.com> Reviewed-by:
Jens Wiklander <jens.wiklander@linaro.org>
-
This commit add an option TPL_BOOTCOUNT_LIMIT to use bootcount on TPL. Signed-off-by:
-
Macro 'cmd_objcopy_uboot' currently does not work with passed empty command expanded from 'cmd_static_rela' and therefore dummy command 'true' is set in 'cmd_static_rela' to workaround this issue. Eliminate it now by fixing 'cmd_objcopy_uboot' macro to work also with empty 'cmd_static_rela' macro and remove useless invocation of command 'true'. Signed-off-by:
Pali Rohár <pali@kernel.org> Reviewed-by:
-
https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini authored
- Espressobin: Disable slot when emmc is not present (Pali) - DS414; config header cleanup (Phil) - PCI: auto-config enhancement (Phil) - pci_mvebu: Also map IO region (Phil) - serial: a3720: Implement pending method for output direction (Pali) - turris_mox: Enable a few commands (Marek) - helios4 & ClearFog changes (Dennis) - Plus some minor misc changes
-
https://gitlab.denx.de/u-boot/custodians/u-boot-efiTom Rini authored
Pull request for documentation tag doc-2021-04-rc1-3 Update the build system for the HTML documentation to allow using Sphinx 3. Man-page for exception command.
-
Tom Rini authored
- e1000 fixes for MIPS - netconsole and ping fix - cortina_ni driver - micrel PHY fix - Add fdtoverlays keyword to extlinux file parsing
-
This adds support for specifying FDT overlays in an extlinux/pxelinux configuration file. Without this, there is no simple way to apply overlays when the kernel and fdt is loaded by the pxe command. This change adds the 'fdtoverlays' keyword for a label, supporting multiple overlay files to be applied on top of the fdt specified in the 'fdt' or 'devicetree' keyword. Example: label linux kernel /Image fdt /soc-board.dtb fdtoverlays /soc-board-function.dtbo append console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait This code makes usage of a new variable called fdtoverlay_addr_r used to load the overlay files without overwritting anything important. Cc: Tom Rini <trini@konsulko.com> Cc: Andre Heider <a.heider@gmail.com> Cc: Jernej Škrabec <jernej.skrabec@siol.net> Cc: Jonas Karlman <jonas@kwiboo.se> Tested-by:Jernej Škrabec <jernej.skrabec@siol.net> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com>
-
The phydev structure has a PHY OF node pointer in it, use that OF node first when looking up PHY OF node properties, since that is likely the correct PHY OF node pointer. If the pointer is not valid, which is the case e.g. on legacy DTs, fall back to parsing MAC ethernet-phy subnode. Signed-off-by:Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
-
Add CAxxxx Ethernet support for the Cortina Access Presidio Engineering Board Signed-off-by:Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Tom Rini <trini@konsulko.com>
-
Add phy driver support for MACs embedded inside Cortina Access SoCs Signed-off-by:
Abbie Chang <abbie.chang@cortina-access.com> Signed-off-by:
-
Add Cortina Access Ethernet device driver for CAxxxx SoCs. This driver supports both legacy and DM_ETH network models. Signed-off-by:
Aaron Tseng <aaron.tseng@cortina-access.com> Signed-off-by:
-
Should not init eth device when doing ping in netconsole. Signed-off-by:Yang Liu <yliu@cybertec.com.au> Cc: Joe Hershberger <joe.hershberger@ni.com>
-
Add some missing address translations from virtual address in local DRAM to physical address, which is needed for the DMA transactions to work correctly. This issue was detected while testing the e1000 driver on the MIPS Octeon III platform, which needs address translation. Signed-off-by: -
Using (dm_)pci_virt_to_mem() is incorrect to translate the virtual address in local DRAM to a physical address. The correct macro here is virt_to_phys() so switch to using this macro. As virt_to_bus() is now not used any more, this patch also removes both definitions (DM and non-DM). This issue was detected while testing the e1000 driver on the MIPS Octeon III platform, which needs address translation. Signed-off-by: -
bus_to_phys() is defined but not referenced at all. This patch removes it completely. Signed-off-by: -
Enable setexpr command in defconfig for Turris MOX. We have found that this is sometimes useful in U-Boot scripts and there is enough space in NOR memory on MOX. Signed-off-by:
Marek Behún <marek.behun@nic.cz> Reviewed-by:
-
Enable wdt command in defconfig for Turris MOX. This is useful when doing debugging. Signed-off-by:
-
Value pcie->dev in function pcie_advk_probe() is not initialized yet so use dev as argument for dev_dbg()/dev_warn(). Function pcie_advk_wait_pio() itself prints error message on failure so do not print duplicate error message in caller. Signed-off-by:
-
To check if some output characters are waiting either in Transmitter Holding Register or Transmitter Shift Register we need to look at TX_EMPTY bit of UART Status Register. Signed-off-by:
-
Heinrich Schuchardt authored
Create man-page for exception command. Signed-off-by:Heinrich Schuchardt <xypron.glpk@gmx.de>
-
Heinrich Schuchardt authored
Update the documentation build system according to Linux v5.11-rc1. Deactive the automarkup.py extension module which on Gitlab CI is incompatible with Unicode. With this patch we can build the HTML documentation using either of Sphinx 2 and Sphinx 3. Signed-off-by: -
Heinrich Schuchardt authored
Install all requirements according to doc/sphinx/requirements.txt in the virtual environment used for testing 'make htmldocs'. Signed-off-by: -
Heinrich Schuchardt authored
Sphinx 3 builds fail due to doc/develop/logging.rst producing duplicate labels. Include logging.h only once in the API section and use cross-references for the enums log_level_t and log_category_t. Signed-off-by: -
Heinrich Schuchardt authored
Two sibling headings (here eMMC) cannot have the same title. Warning, treated as error: doc/board/microchip/mpfs_icicle.rst:423:duplicate label board/microchip/mpfs_icicle:emmc, other instance in doc/board/microchip/mpfs_icicle.rst make[1]: *** [doc/Makefile:69: htmldocs] Error 2 * Correct the heading levels. * Add missing empty lines after headings. Fixes: 9e550e18 ("doc: board: Add Microchip MPFS Icicle Kit doc") Signed-off-by:
-
Configure an IO region and window for PNP identical to how MEM region is set up. Linux does this only if the DT defines a pcie-io-aperture property for the SOC, but since all supported boards do this should not be needed. Signed-off-by:
Phil Sutter <phil@nwl.cc> Reviewed-by:
-
On my DS414, some PCI devices return odd values when probing BAR sizes. An obvious case is all-ones response, the Linux driver (drivers/pci/probe.c) catches those explicitly and a comment explains that either bit 0 or bit 1 must be clear (depending on MEM or IO type). Other BARs return e.g. 0xfff0000f or 0xfff00004 and thus manage to break size calculation due to the "middle" zeroes. Mitigate that copying more or less what Linux does and do a "find least bit set". Signed-off-by:
-
A few minor changes: * Get rid of leftover comments, other commits removed the defines they referred to. * CONFIG_SYS_NETA_INTERFACE_TYPE is not used anymore since commit e3b9c98a ("net: mvneta: Convert to driver model"). * Drop CONFIG_USB_MAX_CONTROLLER_COUNT: it is per-HCI type, so XHCI and EHCI could still both work be used. * Unconditionally define CONFIG_EHCI_IS_TDI: it has no effect on XHCI so that conditional doesn't make any sense. * Define a larger PHY_ANEG_TIMEOUT: In my test bed, the NIC is directly connected to some RTL8111 and the default 8s timeout was often too short. Signed-off-by:
-
This change extends previous commit 061c6d1b ("arm: mvebu: Espressobin: Detect presence of emmc at runtime") and when emmc is not present then emmc is removed from U-Boot DM and corresponding slot is disabled. Therefore on Espressobin board without soldered emmc, state of emmc hw should be same as if emmc was disabled in DTS. Signed-off-by:
-
SATA and UART ClearFog imaages are not buildable as ENV_SECT_SIZE is not defined set values for both possible targets Signed-off-by:Dennis Gilmore <dennis@ausil.us>
-
Move all aliases defintions into the main dts file Add u-boot definiton to i2c0 based on clearfog set spi1 status to okay Signed-off-by: -
mirror the clearfog setup to enable SPI to work Signed-off-by: -
The Armada driver also works on Nedap's custom Kirkwood board with a Marvell 88F6180 CPU. The original commit of that driver, commit 704d9a64 ("gpio: Add DM GPIO driver for Marvell MVEBU"), also mentions that this driver would be suitable for Kirkwood. This does not completely replace the Kirkwood specific driver as there are still boards depending on that driver. Signed-off-by:
Harm Berntsen <harm.berntsen@nedap.com> CC: Stefan Roese <sr@denx.de>, Reviewed-by:
-
When testing builds provided in https://github.com/openwrt/openwrt/pull/3360 I discovered that fdtfile was not set and as a result the firmware was not functional. So I am documenting what is needed. Signed-off-by:
-
- Jan 26, 2021
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiTom Rini authored
- New Allwinner H616 SoC support (sans Ethernet & USB) - H6 DT update - Tanix TX6 TV box support - OrangePi 3 support - OrangePi Zero2 (H616) support
-
- Jan 25, 2021
-
-
OrangePi Zero2 is SBC based on Allwinner H616 with 1 GiB of RAM, SD card support, gigabit ethernet, micro HDMI, WIFI, Bluetooth and 1 USB 2.0 port. It also has two GPIO headers which allows further peripherals to be used. The devicetree file is taken from v3 of the OrangePi Zero2 Linux submission [1], which it's not yet merged. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2021-January/632084.html Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Signed-off-by:
-
