Parthiban Nallathambi authored 4 years ago and Lokesh Vutla committed 4 years ago

phyBOARD-REGOR is based on phyCORE AM335x R2 SoM (PCL060).

CPU  : AM335X-GP rev 2.1
Model: Phytec AM335x phyBOARD-REGOR
DRAM:  512 MiB
NAND:  512 MiB
MMC:   OMAP SD/MMC: 0
eth0: ethernet@4a100000

Working:
 - Eth0
 - i2C
 - MMC/SD
 - NAND
 - UART
 - USB (host)

Device trees were taken from Linux mainline:
commit c4d6fe731176 ("Linux 5.9.0")

Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

André Przywara authored 4 years ago and Tom Rini committed 4 years ago

This is a combination of upstream libfdt commits to fix warnings about
comparing signed and unsigned integers:
==========
scripts/dtc/libfdt/fdt.c: In function ‘fdt_offset_ptr’:
scripts/dtc/libfdt/fdt.c:137:18: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
   if ((absoffset < offset)
...
==========

For a detailed description of the fixes, see the dtc repo:
https://git.kernel.org/pub/scm/utils/dtc/dtc.git/log/?id=73e0f143b73d808



For this patch the commits between 73e0f143b73d8088 and ca19c3db2bf62000
have been combined and adjusted for the slight differences in U-Boot's
libfdt code base.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>

- Avoid using hardcoded number of variable range MTRRs in mtrr_commit()
- coral: Correct max98357 file
- coral: Update smbios tables to latest definition

Simon Glass authored 4 years ago and Bin Meng committed 4 years ago

The accepted binding uses multiple nodes, one for each table type. Update
coral accordingly.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

Simon Glass authored 4 years ago and Bin Meng committed 4 years ago

This somehow ended up as an empty file. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Bin Meng <bmeng.cn@gmail.com>

Since commit 29d2d64e ("x86: Add support for more than 8 MTRRs"),
the maximum number of variable range MTRRs was increased from 8 to 10.
On the BayTrail platform there are only 8 variable range MTRRs. In
mtrr_commit() it still uses MTRR_MAX_COUNT which caused a #GP during
VESA video driver probe. It should have been updated to use dynamically
probed number.

This fixes the boot failure seen on Intel Minnow Max board.

Fixes: 29d2d64e ("x86: Add support for more than 8 MTRRs")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Signed-off-by: Tom Rini <trini@konsulko.com>

Pull request for UEFI sub-system for efi-2021-01-rc2 (2)

The following bugs are fixed:

* The conitrace command failed to build.
* Non-volatile UEFI variables were not delete form the file store.

The following features are added:

* Support for the FN1 - FN10 keys on crosswire keyboards is added.
* An EFI binary is provided to dump the binary device tree.

tpm2_get_capability() is adjusted in preparation of the implementation
of the EFI_TCG2_PROTOCOL.

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

Amit Singh Tomar authored 4 years ago and Tom Rini committed 4 years ago

after commit 4ab3817f ("clk: fixed-rate: Enable DM_FLAG_PRE_RELOC flag")
Cubieboard7 (based on actions S700 SoC) fails to boot.

It is due to the fact that the default value of CONFIG_SYS_MALLOC_F_LEN (0x400)
would not provide enough memory for clock device to probe (before relocation)
well.

This commit fixes it, by increasing SYS_MALLOC_F_LEN to value 0x2000.

Suggested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>

Marek Vasut authored 4 years ago and Tom Rini committed 4 years ago

In case there is an EEPROM attached to the KS8851 MAC and the EEPROM
contains a valid MAC address, the MAC address is loaded into the NIC
registers on power on. Read the MAC address out of the NIC registers
and provide it to U-Boot.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>

Ilias Apalodimas authored 4 years ago and Heinrich Schuchardt committed 4 years ago

For implementing the EFI_TCG2_PROTOCOL we need the count field returned by
the TPM when reading capabilities via tpm2_get_capability().

Adjust the implementation of the 'tpm2 get_capability' command accordingly.

Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

For validating the fixed up device tree we need a tool to need to save it
to a file.

dtbdump.efi copies the configuration table with the device tree to a file
on the same partition from which dtbdump.efi was invoked. The file name can
be entered on the console.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

When deleting a non-volatile variable it was deleted from memory but the
deletion was not persisted to the file system.

SetVariable() may be called with attributes == 0 to delete a variable. To
determine if the deletion shall be persisted we have to consider the
non-volatile flag in the attributes of the deleted variable and not the
value passed in the call parameter.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

Chromebooks and the sandbox use a crosswire keyboard with function keys
FN1 - FN10. These keys are needed when running UEFI applications like GRUB
or the UEFI SCT.

Add support for these keys when translating from key codes to
ECMA-48 (or withdrawn ANSI 3.64) escape sequences.

All escape sequences start with 0x1b. So we should not repeat this
byte in the kbd_to_ansi364 table.

For testing use:

sandbox_defconfig + CONFIG_EFI_SELFTEST=y

$ ./u-boot -D -l

=> setenv efi_selftest extended text input
=> bootefi selftest

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

This command was missed when renaming getc() to getchar().

Fixes: c670aeee ("common: rename getc() to getchar()")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

patman status subcommand to collect tags from Patchwork
patman showing email replies from Patchwork
sandbox poweroff command
minor fixes in binman, tests

- meson64_android: don't show logo on ROM USB boot
- doc: update support matrix and fix vim3/l build instructions
- meson64: relocate config_distro_bootcmmd header

- Add a new SMBIOS parser and enable it when booting from coreboot
- Fix up various driver names to avoid dtoc warnings
- Fully enable ACPI support on Google Chromebook Coral
- Add a way to set SMBIOS properties using the devicetree
- Update existing boards to use devicetree for SMBIOS using a new
  default sysinfo driver

Pali Rohár authored 4 years ago and Tom Rini committed 4 years ago

Calling 'make V=1 all' on Ubuntu 18.04 with gcc version 9.2.1 and GNU Make
version 4.1 fails on error:

    scripts/Kbuild.include:220: *** Recursive variable 'echo-cmd' references itself (eventually).  Stop.

As a workaround expand 'echo-cmd' variable via 'call' construction instead
of expanding it directly.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reported-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Fixes: ae897022 ("Makefile: Fix u-boot-nodtb.bin target")

Simon Glass authored 4 years ago and Bin Meng committed 4 years ago

Now that we can use devicetree to specify this information, drop the old
CONFIG options.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

Simon Glass authored 4 years ago and Bin Meng committed 4 years ago

Add a file containing defaults for these, using the existing CONFIG
options. This file must be included with #include since it needs to
be passed through the C preprocessor.

Enable the driver for all x86 boards that generate SMBIOS tables.
Disable it for coral since it has its own driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: reword the commit message a little bit]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

Simon Glass authored 4 years ago and Bin Meng committed 4 years ago

Add settings and enable the default sysinfo driver so that these can come
from the device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

Simon Glass authored 4 years ago and Bin Meng committed 4 years ago

Add settings and enable the default sysinfo driver so that these can come
from the device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

Simon Glass authored 4 years ago and Bin Meng committed 4 years ago

Add settings and enable the default sysinfo driver so that these can come
from the device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

Simon Glass authored 4 years ago and Bin Meng committed 4 years ago

Add settings and enable the default sysinfo driver so that these can come
from the device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

Simon Glass authored 4 years ago and Bin Meng committed 4 years ago

Add settings and enable the default sysinfo driver so that these can come
from the device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

Simon Glass authored 4 years ago and Bin Meng committed 4 years ago

Some boards want to specify the manufacturer or product name but do not
need to have their own sysinfo driver.

Add a default driver which provides a way to specify this SMBIOS
information in the devicetree, without needing any board-specific
functionality.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

Simon Glass authored 4 years ago and Bin Meng committed 4 years ago

Add information about how to set SMBIOS properties using the devicetree.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

Simon Glass authored 4 years ago and Bin Meng committed 4 years ago

The current tables only support a subset of the available fields defined
by the SMBIOS spec. Add a few more.

We could use CONFIG_SYS_CPU or CONFIG_SYS_SOC as a default for family, but
the meaning of that value relates more to the whole system rather than
just the SoC.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

Simon Glass authored 4 years ago and Bin Meng committed 4 years ago

Support a way to put SMBIOS properties in the device tree. These can be
placed in a 'board' device in an 'smbios' subnode.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

Simon Glass authored 4 years ago and Bin Meng committed 4 years ago

As a first step to obtaining SMBIOS information from the devicetree, add
an ofnode parameter to the writing functions.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

Simon Glass authored 4 years ago and Bin Meng committed 4 years ago

Add a simple binding file for this, so that it is clear what this binding
directory is for.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

Simon Glass authored 4 years ago and Bin Meng committed 4 years ago

This uclass is intended to provide a way to obtain information about a
U-Boot board. But the concept of a U-Boot 'board' is the whole system,
not just one circuit board, meaning that 'board' is something of a
misnomer for this uclass.

In addition, the name 'board' is a bit overused in U-Boot and we want to
use the same uclass to provide SMBIOS information.

The obvious name is 'system' but that is so vague as to be meaningless.
Use 'sysinfo' instead, since this uclass is aimed at providing information
on the system.

Rename everything accordingly.

Note: Due to the patch delta caused by the symbol renames, this patch
shows some renamed files as being deleted in one place and created in
another.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

Simon Glass authored 4 years ago and Bin Meng committed 4 years ago

Much of the output is not very useful. The bootm command is quite a bit
quieter. Convert some output to use log_debug().

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>

Simon Glass authored 4 years ago and Bin Meng committed 4 years ago

With Chrome OS the kernel setup block is stored in a separate place from
the kernel, so it is not possible to access the kernel version string.
At present, garbage is printed.

Add a sanity check to avoid this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

Simon Glass authored 4 years ago and Bin Meng committed 4 years ago

Add logging for each part of the boot process, using a new

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>

Simon Glass authored 4 years ago and Bin Meng committed 4 years ago

At present the top of available DRAM is the same as the top of the range
of the low-memory MTRR.

In fact, U-Boot is allowed to use memory up until the start of the FSP
reserved memory. Use that value for low_end, since it makes more memory
available.

Keep the same calculation as before for mtrr_top, i.e. the top of
reserved memory.

A side-effect of this change is that the E820 tables have a single entry
that extends from the bottom of the memory used by U-Boot to the bottom
of the FSP reserved memory. This includes the bloblist, if ACPI tables
are placed there.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

Simon Glass authored 4 years ago and Bin Meng committed 4 years ago

This does not necessarily indicate a problem, since some pins are
optional. Let the caller show an error if necessary.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

Signed-off-by: Simon Glass <sjg@chromium.org>

Simon Glass authored 4 years ago and Bin Meng committed 4 years ago

This is useful when using Linux's earlycon since the MMIO address must be
provided on some platforms, e.g.:

   earlycon=uart8250,mmio32,0xddffc000,115200n8

However this is only for debugging, so don't show it by default.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>