Add missing GUID short text used in the efidebug tables and efidebug dh
sub-commands.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

Correct missing descriptions and typos in efi_loader.h.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

VenHw and VenMedia device path nodes may carry vendor defined data of
arbitrary length. When converting a device path node to text ensure that we
do not overrun our internal buffer.

In our implementation of
EFI_DEVICE_PATH_TO_TEXT_PROTOCOL.ConvertDevicePathToText() we could first
determine the output length and then allocate buffers but that would nearly
double the code size. Therefore keep the preallocated buffers and truncate
excessive device paths instead.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

Klaus Heinrich Kiwi authored 4 years ago and Heinrich Schuchardt committed 4 years ago

Fix a missing comma sign (,) from a printf(), that is only
reachable if DEBUG is defined, in which case the build fails with:

    tools/mkeficapsule.c:266:36: error: expected ‘)’ before ‘bin’
      266 |  printf("\tbin: %s\n\ttype: %pUl\n" bin, guid);
          |                                    ^~~~
          |                                    )

Signed-off-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

tools/mkeficapsule.c is used to prepare test files for testing the UEFI
sub-system.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

The UEFI spec does not allow ACPI tables to be in runtime services memory.
It recommends EfiACPIReclaimMemory.

Remove a superfluous check that the allocated pages are 16 byte aligned.
EFI pages are 4 KiB aligned.

Fixes: 86df34d4 ("efi_loader: Install ACPI configuration tables")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

- Remove various older platforms that are missing DM migrations and have
  had their removal ack'd.

This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.  As this is the last ARCH_MPC8569 board, remove that support
as well.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>

In the cases of T2080RDB_SECURE_BOOT, T2080RDB_SRIO_PCIE_BOOT,
P2041RDB_SECURE_BOOT, P2041RDB_SRIO_PCIE_BOOT, P3041DS_SRIO_PCIE_BOOT
and P4080DS_SRIO_PCIE_BOOT while some forms of the board have been
migrated more fully to current build standards, these have not.  Remove
them.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>

This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Stefano Babic <sbabic@denx.de>

This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>

This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>

This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>

- squashfs, btrfs fixes
- Kconfig CONFIG logic fixes
- hikey DM migration
- Some portability fixes for the build system
- Assorted code cleanups

Siew Chin Lim authored 4 years ago and Tom Rini committed 4 years ago

Commit "common: Drop asm/global_data.h from common header" added
asm/global_data.h into secure.h. However, secure.h will be included
by psci.S. Adding asm/global_data.h has caused compilation failure in
pcsi.S. Add "ifndef __ASSEMBLY__" in asm/global_data.h.

Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Heinrich Schuchardt authored 4 years ago and Tom Rini committed 4 years ago

When copying to a u32 field we should use sizeof(u32) and not
sizeof(*u32) in memcpy.

On 64bit systems like cortina_presidio-asic-emmc_defconfig using
sizeof(*u32) leads to a buffer overrun.

Fixes: febe13b4 ("net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-By: Ramon Fried <rfried.dev@gmail.com>

Heinrich Schuchardt authored 4 years ago and Tom Rini committed 4 years ago

ca_do_bch_correction() takes a random value from the stack and starts
counting bitflips from this value. Initialize the counter.

This passed unnoticed as the value is finally ignored in the call
hierarchy.

Fixes: 161df94b ("mtd: rawnand: cortina_nand: Add Cortina CAxxxx SoC support")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

Heinrich Schuchardt authored 4 years ago and Tom Rini committed 4 years ago

The values of left_edge[0] and right_edge[0] are overwritten before they
are used. Remove the superfluous assignments.

Fixes: 285b3cb9 ("dm: ddr: socfpga: fix gen5 ddr driver to not use bss")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

Siew Chin Lim authored 4 years ago and Tom Rini committed 4 years ago

Include "compiler.h" in sha512.c. This is needed by 'cpu_to_be64' macro
that used in 'sha512_base_do_finalize' function.

Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Peter Robinson authored 4 years ago and Tom Rini committed 4 years ago

In 8a8d24bd Simon dropped data from all the various _platdata calls
but it seems this wasn't caught for the RNG200 driver from when it
was posted to merged. This fixes that issue.

Fixes: 537f0018 (rng: Add iProc RNG200 driver)
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>

Heinrich Schuchardt authored 4 years ago and Tom Rini committed 4 years ago

test/cmd/setexpr.c cannot be linked with CONFIG_CMD_SETEXPR=n:

ld.bfd: test/built-in.o: in function `setexpr_test_sub':
test/cmd/setexpr.c:227: undefined reference to `setexpr_regex_sub'
ld.bfd: test/built-in.o: in function `setexpr_test_backref':
test/cmd/setexpr.c:267: undefined reference to `setexpr_regex_sub'

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

Heinrich Schuchardt authored 4 years ago and Tom Rini committed 4 years ago

Avoid build warnings observed with gcc 10.2

In file included from lib/rsa/rsa-keyprop.c:16:
include/u-boot/rsa-mod-exp.h:65:24: warning:
‘struct udevice’ declared inside parameter list will not be visible
outside of this definition or declaration
   65 | int rsa_mod_exp(struct udevice *dev, const uint8_t *sig,
      | uint32_t sig_len,
      |                        ^~~~~~~
include/u-boot/rsa-mod-exp.h:96:24: warning:
‘struct udevice’ declared inside parameter list will not be visible
outside of this definition or declaration
   96 |  int (*mod_exp)(struct udevice *dev, const uint8_t *sig,
      |

by defining struct udevice.

Fixes: 401d1c4f ("common: Drop asm/global_data.h from common header")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

Matthias Brugger authored 4 years ago and Tom Rini committed 4 years ago

The EFI Grub workaround on BananaPi R2 slows down the boot process to
the point, that the watchdog will trigger a reboot before the kernel can
reset it. Fix this by disabeling the workaround.

Signed-off-by: Matthias Brugger <mbrugger@suse.com>

Sean Anderson authored 4 years ago and Tom Rini committed 4 years ago

Currently we fail silently if there is an algorithm mismatch. To help
distinguish this failure condition.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>

Diego Sueiro authored 4 years ago and Tom Rini committed 4 years ago

Currently, the kernel devicetree is setting the DRAM size to ~4G.

Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>

Vincent Stehlé authored 4 years ago and Tom Rini committed 4 years ago

VIRTIO_ID_MAX_NUM is the largest device ID plus 1. Therefore a device id
cannot be greater or equal to VIRTIO_ID_MAX_NUM. Fix the comparison
accordingly.

Fixes: 8fb49b4c ("dm: Add a new uclass driver for VirtIO transport devices")
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>

Roger Pau Monne authored 4 years ago and Tom Rini committed 4 years ago

Current sed usage in the DTC command relies on GNU sed specific -i
option which has a slightly different syntax for BSD sed and always
expects an extension to be provided in order to create a backup file.

Instead drop the cat concatenation done before the sed call and use
sed itself to edit and concatenate the files.

No functional change intended.

Signed-off-by: Roger Pau Monné <royger@FreeBSD.org>

Roger Pau Monne authored 4 years ago and Tom Rini committed 4 years ago

Fist use extended regexp in order to drop the '\' around the
parentheses which is not supported by BSD sed in regular mode.

Secondly use [[:blank:]] instead of \s, as the later is a GNU
extension.

No functional change intended.

Signed-off-by: Roger Pau Monné <royger@FreeBSD.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

Heinrich Schuchardt authored 4 years ago and Tom Rini committed 4 years ago

Compiling the sandbox fails on armv7 due to conflicting definitions of
memcpy() and memset() in include/malloc.h and include/linux/string.h.

Use linux/string.h here.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

Peter Robinson authored 4 years ago and Tom Rini committed 4 years ago

Convert the hikey to use DM_USB and DM_ETH.

Conversion based on rpi as it has a similar DWC config.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>

Marek Behún authored 4 years ago and Tom Rini committed 4 years ago

The pinmux command uses functions pinctrl_get_pin_*(), which are missing
if PINCTRL config option is disabled.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Klaus Heinrich Kiwi authored 4 years ago and Tom Rini committed 4 years ago

U-boot allows the default device tree to be overridden from
the build environment using the DEVICE_TREE variable.

Make sure that we include it in the SPL FIT mkimage build step.

This also fixes a broken image in case CONFIG_OF_LIST and
CONFIG_OF_OVERLAY_LIST are unset (i.e., expected to be supplied
by the DEVICE_TREE env var).

Signed-off-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>

Klaus Heinrich Kiwi authored 4 years ago and Tom Rini committed 4 years ago

Having the ability to support firmware FIT signatures on the SPL sounds
not so useful if the SPL is not supporting to load a (U-boot) firmware
as a FIT image.

Signed-off-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>

Klaus Heinrich Kiwi authored 4 years ago and Tom Rini committed 4 years ago

Selecting SPL_FIT_SIGNATURE (without selecting U-boot proper
verified boot first) breaks the build due to
CONFIG_FIT_SIGNATURE_MAX_SIZE being undefined, in addition to Kconfig
warnings on RSA and IMAGE_SIGN_INFO unmet dependencies.

Signed-off-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>

Marek Behún authored 4 years ago and Tom Rini committed 4 years ago

Since commit 325dd1f6 ("fs: btrfs: Use btrfs_iter_dir() to ...")
when btrfs is listing a directory, the output is not aligned:

  <SYMLINK>         15  Wed Sep 09 13:20:03 2020  boot.scr -> @/boot/boot.scr
  <DIR>          0  Tue Feb 02 12:42:09 2021  @
  <FILE>        108  Tue Feb 02 12:54:04 2021  1.info

Return back to how it was displayed previously, i.e.:

  <SYM>         15  Wed Sep 09 13:20:03 2020  boot.scr -> @/boot/boot.scr
  <DIR>          0  Tue Feb 02 12:42:09 2021  @
  <   >        108  Tue Feb 02 12:54:04 2021  1.info

Instead of '<FILE>', print '<   >', as ext4 driver.

If an unknown directory item type is encountered, we will print the type
number left padded with spaces, enclosed by '?', instead of '<' and '>',
i.e.:

  ? 30?        .............................  name

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Fixes: 325dd1f6 ("fs: btrfs: Use btrfs_iter_dir() to replace ...")
Cc: David Sterba <dsterba@suse.com>
Cc: Qu Wenruo <wqu@suse.com>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>

Marek Behún authored 4 years ago and Tom Rini committed 4 years ago

Skip xattrs in directory listing. U-Boot filesystem drivers do not list
xattrs.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: David Sterba <dsterba@suse.com>
Cc: Qu Wenruo <wqu@suse.com>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>

Wasim Khan authored 4 years ago and Tom Rini committed 4 years ago

Sometimes it is useful to boot OS with already fixed-up
device tree. Check for env variable 'skip_board_fixup'
before calling ft_board_setup().
Current behaviour is unchanged, additionally user can
set skip_board_fixup to 1 to skip the fixup.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>

Heinrich Schuchardt authored 4 years ago and Tom Rini committed 4 years ago

sqfs_opendir() called in sqfs_size(), sqfs_read(), sqfs_exists() may fail
leading to sqfs_closedir(NULL) being called. Do not dereference NULL.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

Currently, we check argc in a number of places to make sure that we have
all of the required arguments for each of the pwm sub-commands.
However, there's at least one place where we've got dead code as we'll
never have argc == 0, due to checking that argc was at least 4 earlier
and having only subtracted 3.  Rework things so that when we have
determined our subcommand make sure we have the right number of
arguments for it, or error out.  This means we can stop checking against
argc again later.

Reported-by: Coverity (CID: 316601)
Cc: Pragnesh Patel <pragnesh.patel@sifive.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

Xilinx changes for v2021.04-rc3

qspi:
- Support for dual/quad mode
- Fix speed handling

clk:
- Add clock enable function for zynq/zynqmp/versal

gem:
- Enable clock for Versal
- Fix error path
- Fix mdio deregistration path

fpga:
- Fix buffer alignment for ZynqMP

xilinx:
- Fix reset reason clearing in ZynqMP
- Show silicon version in SPL for Zynq/ZynqMP
- Fix DTB selection for ZynqMP
- Rename zc1275 to zcu1275 to match DT name