- Feb 26, 2021
-
-
This line should come before the docs for the next function. Fixes: 7aeedac0 ("mtd: spi: Port SPI NOR framework from Linux") Signed-off-by:
Sean Anderson <seanga2@gmail.com> Reviewed-by:
Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by:
Jagan Teki <jagan@amarulasolutions.com>
-
The sf test command is used to test spi flashes (and spi masters). Printing the exact error code is very helpful to those debugging the spi stack. Signed-off-by:
Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: -
If there is an error while erasing SPI flash, no errno is displayed. This makes it difficult to determine the cause of the error. This change mirrors the logic for write errors above. Signed-off-by:
Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: -
On the i.MX8M Mini, ret = clk_set_rate() sets ret to the value of the rate the clock was able to set. When checking for errors, it only checks that it is not NULL. Since positive numbers are not errors, only check for negative numbers when handling errors. Fixes: 383fded7 ("spi: nxp_fspi: new driver for the FlexSPI controller") Signed-off-by:
Adam Ford <aford173@gmail.com> Reviewed-by:
-
The NOR flash w25q128 denoted by JEDEC ID 0xef4018 actually represents various models. From Winbond's website, I could only find 3 types of them: W25Q128JV-IQ/JQ datasheet:https://www.winbond.com/resource-files/ w25q128jv%20revg%2004082019%20plus.pdf W25Q128FV (SPI Mode) datasheet: https://www.winbond.com/resource-files/ w25q128fv%20rev.m%2005132016%20kms.pdf W25Q128BV datesheet: https://www.winbond.com/resource-files/ w25q128bv_revh_100313_wo_automotive.pdf According to the datasheets, all of these 3 types support BP(0,1,2) and TB bits in the status register (SR), so it could reuse the flash protection logic for ST Micro. So it should be safe to add the SPI_NOR_HAS_LOCK and SPI_NOR_HAS_TB flags to the w25q128 entry of spi_nor_ids table. Signed-off-by:Su Baocheng <baocheng.su@siemens.com> [jagan: remove comments in spi-nor-ids.c] Signed-off-by:
-
U-Boot coding convention prefers tabs over spaces. Signed-off-by:
Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: -
Add GD25LQ24C 64Mbit chip to spi-nor id table. This chip is used on rk3399-gru-kevin: => sf probe SF: Detected gd25lq64c with page size 256 Bytes, erase size 4 KiB, total 8 MiB => sf erase 0x600000 0x200000 SF: 2097152 bytes @ 0x600000 Erased: OK => sf test 0x700000 0x1000 SPI flash test: 0 erase: 52 ticks, 76 KiB/s 0.608 Mbps 1 check: 5 ticks, 800 KiB/s 6.400 Mbps 2 write: 14 ticks, 285 KiB/s 2.280 Mbps 3 read: 3 ticks, 1333 KiB/s 10.664 Mbps Test passed 0 erase: 52 ticks, 76 KiB/s 0.608 Mbps 1 check: 5 ticks, 800 KiB/s 6.400 Mbps 2 write: 14 ticks, 285 KiB/s 2.280 Mbps 3 read: 3 ticks, 1333 KiB/s 10.664 Mbps The values are the same as in Linux, except adjusted for the U-Boot definition of INFO(). Signed-off-by:Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by:
-
The set_speed() callback should configure the bus speed, make it so. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by:
Bin Meng <bmeng.cn@gmail.com>
-
- Feb 25, 2021
-
-
Tom Rini authored
- Remove various older platforms that are missing DM migrations and have had their removal ack'd.
-
Tom Rini authored
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. As this is the last ARCH_MPC8569 board, remove that support as well. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by:
Tom Rini <trini@konsulko.com> Reviewed-by:
Priyanka Jain <priyanka.jain@nxp.com>
-
Tom Rini authored
In the cases of T2080RDB_SECURE_BOOT, T2080RDB_SRIO_PCIE_BOOT, P2041RDB_SECURE_BOOT, P2041RDB_SRIO_PCIE_BOOT, P3041DS_SRIO_PCIE_BOOT and P4080DS_SRIO_PCIE_BOOT while some forms of the board have been migrated more fully to current build standards, these have not. Remove them. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by:
-
Tom Rini authored
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by:
Stefano Babic <sbabic@denx.de>
-
Tom Rini authored
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
Fabio Estevam <festevam@gmail.com>
-
Tom Rini authored
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Tom Rini authored
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Tom Rini authored
- squashfs, btrfs fixes - Kconfig CONFIG logic fixes - hikey DM migration - Some portability fixes for the build system - Assorted code cleanups
-
- Feb 24, 2021
-
-
Commit "common: Drop asm/global_data.h from common header" added asm/global_data.h into secure.h. However, secure.h will be included by psci.S. Adding asm/global_data.h has caused compilation failure in pcsi.S. Add "ifndef __ASSEMBLY__" in asm/global_data.h. Signed-off-by:
Siew Chin Lim <elly.siew.chin.lim@intel.com> Reviewed-by:
Simon Glass <sjg@chromium.org>
-
When copying to a u32 field we should use sizeof(u32) and not sizeof(*u32) in memcpy. On 64bit systems like cortina_presidio-asic-emmc_defconfig using sizeof(*u32) leads to a buffer overrun. Fixes: febe13b4 ("net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs") Signed-off-by:
Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-By:
Ramon Fried <rfried.dev@gmail.com>
-
ca_do_bch_correction() takes a random value from the stack and starts counting bitflips from this value. Initialize the counter. This passed unnoticed as the value is finally ignored in the call hierarchy. Fixes: 161df94b ("mtd: rawnand: cortina_nand: Add Cortina CAxxxx SoC support") Signed-off-by:
-
The values of left_edge[0] and right_edge[0] are overwritten before they are used. Remove the superfluous assignments. Fixes: 285b3cb9 ("dm: ddr: socfpga: fix gen5 ddr driver to not use bss") Signed-off-by:
-
Include "compiler.h" in sha512.c. This is needed by 'cpu_to_be64' macro that used in 'sha512_base_do_finalize' function. Signed-off-by:
-
In 8a8d24bd Simon dropped data from all the various _platdata calls but it seems this wasn't caught for the RNG200 driver from when it was posted to merged. This fixes that issue. Fixes: 537f0018 (rng: Add iProc RNG200 driver) Signed-off-by:
Peter Robinson <pbrobinson@gmail.com>
-
test/cmd/setexpr.c cannot be linked with CONFIG_CMD_SETEXPR=n: ld.bfd: test/built-in.o: in function `setexpr_test_sub': test/cmd/setexpr.c:227: undefined reference to `setexpr_regex_sub' ld.bfd: test/built-in.o: in function `setexpr_test_backref': test/cmd/setexpr.c:267: undefined reference to `setexpr_regex_sub' Signed-off-by:
-
Avoid build warnings observed with gcc 10.2 In file included from lib/rsa/rsa-keyprop.c:16: include/u-boot/rsa-mod-exp.h:65:24: warning: ‘struct udevice’ declared inside parameter list will not be visible outside of this definition or declaration 65 | int rsa_mod_exp(struct udevice *dev, const uint8_t *sig, | uint32_t sig_len, | ^~~~~~~ include/u-boot/rsa-mod-exp.h:96:24: warning: ‘struct udevice’ declared inside parameter list will not be visible outside of this definition or declaration 96 | int (*mod_exp)(struct udevice *dev, const uint8_t *sig, | by defining struct udevice. Fixes: 401d1c4f ("common: Drop asm/global_data.h from common header") Signed-off-by: -
The EFI Grub workaround on BananaPi R2 slows down the boot process to the point, that the watchdog will trigger a reboot before the kernel can reset it. Fix this by disabeling the workaround. Signed-off-by:Matthias Brugger <mbrugger@suse.com>
-
Currently we fail silently if there is an algorithm mismatch. To help distinguish this failure condition. Signed-off-by:Sean Anderson <sean.anderson@seco.com>
-
Currently, the kernel devicetree is setting the DRAM size to ~4G. Signed-off-by:Diego Sueiro <diego.sueiro@arm.com>
-
VIRTIO_ID_MAX_NUM is the largest device ID plus 1. Therefore a device id cannot be greater or equal to VIRTIO_ID_MAX_NUM. Fix the comparison accordingly. Fixes: 8fb49b4c ("dm: Add a new uclass driver for VirtIO transport devices") Signed-off-by:
Vincent Stehlé <vincent.stehle@laposte.net> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com>
-
Current sed usage in the DTC command relies on GNU sed specific -i option which has a slightly different syntax for BSD sed and always expects an extension to be provided in order to create a backup file. Instead drop the cat concatenation done before the sed call and use sed itself to edit and concatenate the files. No functional change intended. Signed-off-by:Roger Pau Monné <royger@FreeBSD.org>
-
Fist use extended regexp in order to drop the '\' around the parentheses which is not supported by BSD sed in regular mode. Secondly use [[:blank:]] instead of \s, as the later is a GNU extension. No functional change intended. Signed-off-by:
-
Compiling the sandbox fails on armv7 due to conflicting definitions of memcpy() and memset() in include/malloc.h and include/linux/string.h. Use linux/string.h here. Signed-off-by:
-
Convert the hikey to use DM_USB and DM_ETH. Conversion based on rpi as it has a similar DWC config. Signed-off-by: -
The pinmux command uses functions pinctrl_get_pin_*(), which are missing if PINCTRL config option is disabled. Signed-off-by:
Marek Behún <marek.behun@nic.cz> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Reviewed-by:
-
U-boot allows the default device tree to be overridden from the build environment using the DEVICE_TREE variable. Make sure that we include it in the SPL FIT mkimage build step. This also fixes a broken image in case CONFIG_OF_LIST and CONFIG_OF_OVERLAY_LIST are unset (i.e., expected to be supplied by the DEVICE_TREE env var). Signed-off-by:Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
-
Having the ability to support firmware FIT signatures on the SPL sounds not so useful if the SPL is not supporting to load a (U-boot) firmware as a FIT image. Signed-off-by: -
Selecting SPL_FIT_SIGNATURE (without selecting U-boot proper verified boot first) breaks the build due to CONFIG_FIT_SIGNATURE_MAX_SIZE being undefined, in addition to Kconfig warnings on RSA and IMAGE_SIGN_INFO unmet dependencies. Signed-off-by: -
Since commit 325dd1f6 ("fs: btrfs: Use btrfs_iter_dir() to ...") when btrfs is listing a directory, the output is not aligned: <SYMLINK> 15 Wed Sep 09 13:20:03 2020 boot.scr -> @/boot/boot.scr <DIR> 0 Tue Feb 02 12:42:09 2021 @ <FILE> 108 Tue Feb 02 12:54:04 2021 1.info Return back to how it was displayed previously, i.e.: <SYM> 15 Wed Sep 09 13:20:03 2020 boot.scr -> @/boot/boot.scr <DIR> 0 Tue Feb 02 12:42:09 2021 @ < > 108 Tue Feb 02 12:54:04 2021 1.info Instead of '<FILE>', print '< >', as ext4 driver. If an unknown directory item type is encountered, we will print the type number left padded with spaces, enclosed by '?', instead of '<' and '>', i.e.: ? 30? ............................. name Signed-off-by:
Qu Wenruo <wqu@suse.com>
-
Skip xattrs in directory listing. U-Boot filesystem drivers do not list xattrs. Signed-off-by:
-
Sometimes it is useful to boot OS with already fixed-up device tree. Check for env variable 'skip_board_fixup' before calling ft_board_setup(). Current behaviour is unchanged, additionally user can set skip_board_fixup to 1 to skip the fixup. Signed-off-by:Wasim Khan <wasim.khan@nxp.com>
-
sqfs_opendir() called in sqfs_size(), sqfs_read(), sqfs_exists() may fail leading to sqfs_closedir(NULL) being called. Do not dereference NULL. Signed-off-by:
-
