At present these features are supported in SPL but not TPL. Update the
Kconfig and Makefile to allow this.

Also add a few Makefile comments to make earier to track what is going on.

Signed-off-by: Simon Glass <sjg@chromium.org>

At present sandbox drivers are mostly not used before relocation. Some of
these are needed by Chromium OS verified boot, since it uses sandbox TPL,
so update them accordingly.

Signed-off-by: Simon Glass <sjg@chromium.org>

This function is really just a call to uclass_get_device() and there is no
reason why the caller cannot do it. Update sandbox and snow accordingly.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Minkyu Kang <mk7.kang@samsung.com>

Add a way to read a file from the host filesystem. This can be useful for
reading test data, for example. Also fix up the writing function which was
not the right version, and drop the debugging lines.

Signed-off-by: Simon Glass <sjg@chromium.org>

It seems useful to make sandbox its own log category since it is used for
so much testing. Add this as a new category.

Signed-off-by: Simon Glass <sjg@chromium.org>

This is not normally useful, so change the code to avoid writing out every
data package. This can be enabled with #define DEBUG.

Signed-off-by: Simon Glass <sjg@chromium.org>

This adds new commands to the EC related to setting and clearing events
as well as controlling power-related settings.

Signed-off-by: Simon Glass <sjg@chromium.org>

The LPC driver expects its buffer to be word-aligned. Add the required
flag to the uclass driver to ensure this.

Signed-off-by: Simon Glass <sjg@chromium.org>

This value is required for flashing to work correctly. Add a check for
it.

Signed-off-by: Simon Glass <sjg@chromium.org>

Add some more logging to provide more information on failures.

Signed-off-by: Simon Glass <sjg@chromium.org>

There is no advantage to using a u8 for function parameters. It forces
the compiler to mask values and can increase code size. Also the command
enum has been extended to 16 bits. Update the functions to use uint
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

At present we should boards with warnings in the same way as those with
errors. This is not ideal. Add a new 'warn' state and show these listed
in yellow to match the actual warning lines printing with -e.

Signed-off-by: Simon Glass <sjg@chromium.org>

At present we don't distinguish between errors and warnings when printing
the architecture summary. Rename the variables to better describe their
purpose.

'Worse' at present means we got an error, so use that as the name.

Signed-off-by: Simon Glass <sjg@chromium.org>

At present messages from the device-tree compiler like this:

  arch/arm/dts/socfpga_arria10_socdk_sdmmc.dtb: Warning
     (avoid_unnecessary_addr_size): /clocks: unnecessary
     #address-cells/#size-cells without "ranges" or child "reg" property

are detected as errors since they don't match the gcc warning regex. Add a
new one for dtc to fix this.

Signed-off-by: Simon Glass <sjg@chromium.org>

At present --list-tool-chains prints a lot of information about the
toolchain-probing process. This is generally not very interesting.
Update buildman to print this only if --list-tool-chains is given
with -v.

Signed-off-by: Simon Glass <sjg@chromium.org>

Simon Goldschmidt authored 6 years ago and Simon Glass committed 6 years ago

When the device tree is missing a correct spi slave description below
the bus (compatible "spi-flash" or spi-max-frequency are missing),
the 'set_speed' callback can be called with 'speed' == 0 Hz.
At least with cadence qspi, this leads to a division by zero.

Prevent this by initializing speed to 100 kHz in this case (same
fallback value as is done in 'dm_spi_claim_bus') and issue a warning
to console.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Baruch Siach authored 6 years ago and Simon Glass committed 6 years ago

Commit 90c08fa0 (fdt: Add device tree memory bindings) removed the
prototype declaration of board_fdt_blob_setup(), most likely by mistake.
This didn't break the build because the only file calling this function
(lib/fdtdec.c) provides a local weak definition. Restore the
declaration.

Cc: Michael Pratt <mpratt@chromium.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>

Hiroyuki Yokoyama authored 6 years ago and Simon Glass committed 6 years ago

This patch fixes the address information of fdt.

wrong case:
 => fdt addr 0x48000000
 => fdt move 0x48000000 0x41000000 0xa000
 => fdt addr
The address of the fdt is 48000000

Active address in this case is 0x41000000.

Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Marek Vasut authored 6 years ago and Simon Glass committed 6 years ago

When U-Boot proper is compiled with CONFIG_MULTI_DTB_FIT and tries
to call uncompress_blob(), it fails with -ENOTSUPP. This is because
the full implementation of this function which includes compression
is available only in SPL. In U-Boot proper or if the compression is
not enabled, the blob is not compressed and thus can be passed to
locate_dtb_in_fit() in fdtdec_setup() without any changes. Pass the
blob without any changes if compression is not enabled instead of
failing.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Liviu Dudau authored 6 years ago and Simon Glass committed 6 years ago

With drivers that have prefix names that are quite long (like
'versatile_') it is useful to have a wider column for the driver's
name when dumping the device driver tree.

Also update the tests to take into account the wider output format.

Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Heinrich Schuchardt authored 6 years ago and Simon Glass committed 6 years ago

If we want to control which network interface is actually used, we have to
issue 'setenv ethrotate no'. If ethrotate is not set any interface may be
used.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

Heinrich Schuchardt authored 6 years ago and Simon Glass committed 6 years ago

The command to set environment variables is setenv.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

Heinrich Schuchardt authored 6 years ago and Simon Glass committed 6 years ago

DEBUG should not be defined in production code.
Change printf() to debug() where this writes a debug message.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

Hou Zhiqiang authored 6 years ago and Simon Glass committed 6 years ago

As the PCIe specification recommend reading the Vendor ID register
to determine if a Function is present, read the Vendor ID of a
non-existent Function must not result in system error, so we'd better
make the first CFG read to Vendor ID instead of Header Type register
in the PCIe enumeration.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

- Clearfog GT-8K support added by Baruch / Raheeb
- const and sizes cleanup (also in MIPS) from Baruch
- Minor cleanup to db-88f6820 from Chris

- adc enhancements
- FAT fix

Thomas RIENOESSL authored 6 years ago and Tom Rini committed 6 years ago

This fixes problems accessing drives formated under
Windows as FAT16.

Signed-off-by: Thomas RIENOESSL <thomas.rienoessl@bachmann.info>
[trini: Rebase on top of f528c140]
Signed-off-by: Tom Rini <trini@konsulko.com>

Jerome Brunet authored 6 years ago and Tom Rini committed 6 years ago

clk81 divider is 0 based (meaning that 0 value in the register means
divide by 1). Fix clk81 rate calculation for this.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

Fabrice Gasnier authored 6 years ago and Tom Rini committed 6 years ago

Add new option to 'adc' command to do a single scan of:
- some channel(s), using mask argument
- all channels available on an ADC device (when optional mask is omitted).

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Fabrice Gasnier authored 6 years ago and Tom Rini committed 6 years ago

Use newly introduced adc_raw_to_uV() API to print conversion result
both as raw value and micro-volts by default.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Fabrice Gasnier authored 6 years ago and Tom Rini committed 6 years ago

Enhance adc info command to report also the channel mask.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Fabrice Gasnier authored 6 years ago and Tom Rini committed 6 years ago

Add two functions to ADC uclass's:
- adc_raw_to_uV() to ease ADC raw value conversion to microvolts
- adc_channel_mask() to get channels on consumer side

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Rabeeh Khoury authored 6 years ago and Stefan Roese committed 6 years ago

The SolidRun Clearfog GT-8K is based on Armada 8040.

https://wiki.solid-run.com/doku.php?id=products:a8040:clearfoggt8k



The config file is identical to the Macchiatobin one
(mvebu_mcbin-88f8040_defconfig) with only the default device-tree
changed.

Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Stefan Roese <sr@denx.de>

Chris Packham authored 6 years ago and Stefan Roese committed 6 years ago

After migration to Kconfig the comment about TEXT_BASE has become
redundant.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>

Baruch Siach authored 6 years ago and Stefan Roese committed 6 years ago

Some Armada 8K boards like Macchiatobin and Clearfog GT-8K use RAM from
external DIMM. Hard coding the RAM size in the device-tree is not
convenient. Fortunately, the ATF that initializes the RAM knows the size
of RAM, and U-Boot can query the ATF using a SMC call.

The ATF maps the lower 3G of RAM starting at address 0. Higher RAM is
mapped at 4G. This leaves a 1G hole between 3G and 4G for IO
peripherals. Use a second bi_dram[] entry to describe the higher RAM
area. As a result, CONFIG_NR_DRAM_BANKS must be set to 2 to use more
than 3GB RAM.

This code in this commit is mostly taken from downstream Marvell U-Boot
code by Grzegorz Jaszczyk.

Cc: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Stefan Roese <sr@denx.de>

Baruch Siach authored 6 years ago and Stefan Roese committed 6 years ago

The kernel added SZ_4G macro in commit f2b9ba871b (arm64/kernel: kaslr:
reduce module randomization range to 4 GB).

Include linux/const.h for the _AC macro.

Drop a local SZ_4G definition in tegra code.

Cc: Tom Warren <twarren@nvidia.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Stefan Roese <sr@denx.de>

Baruch Siach authored 6 years ago and Stefan Roese committed 6 years ago

Commit 86f21c96 (mips: Use common _AC macro now.) removed the _AC
definition from const.h. All other macros defined in const.h are not
used anywhere, and there is now no user of this header. Remove this
header.

Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>

Baruch Siach authored 6 years ago and Stefan Roese committed 6 years ago

Drop the _AC and UL macros from common.h. Linux headers is the original
source of this macro, so keep its definition in the same header.

Update existing users of these macros to include const.h directly.

Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Rick Chen <rick@andestech.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>

Baruch Siach authored 6 years ago and Stefan Roese committed 6 years ago

Combine the uapi/linux/const.h header into the kernel linux/const.h. The
next commit will use the _AC macro this header instead of the common.h
definition.

Based on Linux kernel version 4.19.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Stefan Roese <sr@denx.de>

- tree-wide: introduce LDFLAGS_STANDALONE
- MIPS: fix long-standing issue with linking of standalone programs
- MIPS: MT76xx: add GPIO and WDT drivers
- MIPS: MT76xx: various fixes and updates to gardena-smart-gateway board
- MIPS: MT76xx: various fixes and updates to linkit-smart-7688 board