Simon Glass authored 7 years ago and Tom Rini committed 7 years ago

We are now using an env_ prefix for environment functions. Rename setenv()
for consistency. Also add function comments in common.h.

Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>

Heinrich Schuchardt authored 7 years ago and Tom Rini committed 7 years ago

No need to assign a value to sig if the next statement using sig
is itself an assignment of a value to sig.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

At present CONFIG_CMD_SATA enables the 'sata' command which also brings
in SATA support. Some boards may wish to enable SATA without the command.
Add a separate CONFIG to permit this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

Christophe Leroy authored 7 years ago and Tom Rini committed 7 years ago

CS Systemes d'Information (CSSI) manufactures 8xx boards for
critical communication systems. Those boards have been
running U-Boot since 2010 and will have to be maintained
until at least 2027.

commit 5b8e76c3
("powerpc, 8xx: remove support for 8xx") orphaned those boards
by removing support for the mpc8xx CPU.

This commit partially restores support for the 8xx, with the
following limitations:
- Restores support for MPC866 and MPC885 only
- Does not restore IDE, PCMCIA, I2C, USB
- Does not restore examples
- Does not restore POST
- Does not restore Ethernet on SCC
- Does not restore console on SCC
- Does not restore bedbug and kgdb support

As the 866 and 885 do not support the following features,
they are not restored either:
- VIDEO / LCD
- RTC clock

The CPM uCODE patch is not restored either, because:
- 866 and 885 already have support for I2C and SPI relocation
without a uCODE patch
- relocation of SMC, I2C or SPI is only needed for using SCCs
for Ethernet or QMC

The dynamic setup/calculation of clocks is removed, we
expect the target being use with the clock and PLPRCR register
defined in the configuration.
All the clock settings for 8xx prior to 866 is removed as
well as we now only support 866 and 885.

This code is mature and addresses mature boards. Therefore
all code enclosed in '#if 0/#endif' and '#if XX_DEBUG/#endif'
is unneeded.

The following files are not restored by this patch:

- arch/powerpc/cpu/mpc8xx/bedbug_860.c
- arch/powerpc/cpu/mpc8xx/fec.h
- arch/powerpc/cpu/mpc8xx/kgdb.S
- arch/powerpc/cpu/mpc8xx/plprcr_write.S
- arch/powerpc/cpu/mpc8xx/scc.c
- arch/powerpc/cpu/mpc8xx/upatch.c
- arch/powerpc/cpu/mpc8xx/video.c
- arch/powerpc/include/asm/status_led.h
- arch/powerpc/lib/ide.c
- arch/powerpc/lib/ide.h
- doc/README.MPC866
- drivers/pcmcia/mpc8xx_pcmcia.c
- drivers/rtc/mpc8xx.c
- drivers/usb/gadget/mpc8xx_udc.c
- drivers/video/mpc8xx_lcd.c
- examples/standalone/test_burst.c
- examples/standalone/test_burst.h
- examples/standalone/test_burst_lib.S
- examples/standalone/timer.c
- include/mpc823_lcd.h
- include/usb/mpc8xx_udc.h
- post/cpu/mpc8xx/Makefile
- post/cpu/mpc8xx/cache.c
- post/cpu/mpc8xx/cache_8xx.S
- post/cpu/mpc8xx/ether.c
- post/cpu/mpc8xx/spr.c
- post/cpu/mpc8xx/uart.c
- post/cpu/mpc8xx/usb.c
- post/cpu/mpc8xx/watchdog.c

Some of the restored files are not located in a proper location.
In order to keep traceability of the changes, they will be
moved to their correct location and moved to Kconfig in a
followup patch.

This patch also declares CSSI as point of contact for the update
of the 8xx platform, as those boards are the only ones still
being maintained on the 8xx area. A later patch will add
those boards to the tree.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>

Emmanuel Vadot authored 7 years ago and Tom Rini committed 7 years ago

Define a default number of 1 for mmc max device if board config didn't
specify one.

Signed-off-by: Emmanuel Vadot <manu@bidouilliste.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Heiko Schocher authored 7 years ago and Tom Rini committed 7 years ago

There was for long time no activity in the mpx5xxx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in mpc5xxx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>

Heiko Schocher authored 7 years ago and Tom Rini committed 7 years ago

There was for long time no activity in the 5xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 5xx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>

Heiko Schocher authored 7 years ago and Tom Rini committed 7 years ago

There was for long time no activity in the 8260 area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 8260,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>

Heiko Schocher authored 7 years ago and Tom Rini committed 7 years ago

There was for long time no activity in the 8xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 8xx,
so remove it (with a heavy heart, knowing that I remove
here the root of U-Boot).

Signed-off-by: Heiko Schocher <hs@denx.de>

Simon Glass authored 7 years ago and Tom Rini committed 7 years ago

At present IDE support is controlled by CONFIG_CMD_IDE. Add a separate
CONFIG_IDE option so that IDE support can be enabled without requiring
the 'ide' command.

Update existing users and move the ide driver into drivers/block since
it should not be in common/.

Signed-off-by: Simon Glass <sjg@chromium.org>

fuz@fuz.su authored 8 years ago and Tom Rini committed 7 years ago

Good evening,

I am trying to port FreeBSD to the ASUS Tinker Board, a computer based
on the Rockchip 3288 SoC. FreeBSD's boot loader (named loader(8)) needs
CONFIG_API to be enabled, but trying to build an U-Boot from trunk with
both CONFIG_API and CONFIG_BLK (as required for Rockchip SoC's?) leads
to the following build failure:

$ CROSS_COMPILE=arm-none-eabi- gmake tinker-rk3288_defconfig all
...
  CC      api/api_storage.o
api/api_storage.c: In function 'dev_read_stor':
api/api_storage.c:334:9: error: 'struct blk_desc' has no member named 'block_read'
  if ((dd->block_read) == NULL) {
         ^~
api/api_storage.c:339:11: error: 'struct blk_desc' has no member named 'block_read'
  return dd->block_read(dd, start, len, buf);
           ^~
api/api_storage.c:340:1: warning: control reaches end of non-void function [-Wreturn-type]
 }
 ^
gmake[2]: *** [scripts/Makefile.build:281: api/api_storage.o] Fehler 1
gmake[1]: *** [Makefile:1229: api] Fehler 2
gmake: *** [Makefile:460: __build_one_by_one] Error 2

I applied the following fix, but the product doesn't boot. Perhaps
that's not a property of the fix though:

Yours,
Robert Clausecker

Emmanuel Vadot authored 8 years ago and Tom Rini committed 8 years ago

Add kconfig file to enable API support

Signed-off-by: Emmanuel Vadot <manu@bidouilliste.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Emmanuel Vadot authored 8 years ago and Tom Rini committed 8 years ago

In a config with one MMC at device id '1' and no MMC at device id '0'
(a BeagleBone Black with no sd inserted for example), the current code
will first test to access the MMC 0 (sd port), seeing that no device is
present it will simply return that no more device are present for this
class.
This patch fixes this by testing all devices for each class.

Signed-off-by: Emmanuel Vadot <manu@bidouilliste.com>

Emmanuel Vadot authored 8 years ago and Tom Rini committed 8 years ago

The current code can loop undefinitly as it doesn't parse
correctly the env data.
Since the env is an hashtable, use the hashtable function for
the API_ENV_ENUM api call.

Signed-off-by: Emmanuel Vadot <manu@bidouilliste.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Walt Feasel authored 8 years ago and Tom Rini committed 8 years ago

Make spelling correction for 'from'

Signed-off-by: Walt Feasel <waltfeasel@gmail.com>

Walt Feasel authored 8 years ago and Tom Rini committed 8 years ago

Make comment style modifications

Signed-off-by: Walt Feasel <waltfeasel@gmail.com>

Walt Feasel authored 8 years ago and Tom Rini committed 8 years ago

Make checkpatch style modification for
WARNING: line over 80 characters

Signed-off-by: Walt Feasel <waltfeasel@gmail.com>

Walt Feasel authored 8 years ago and Tom Rini committed 8 years ago

Make checkpatch style modification for
CHECK: Blank lines aren't necessary after
an open brace '{'

Signed-off-by: Walt Feasel <waltfeasel@gmail.com>

Walt Feasel authored 8 years ago and Tom Rini committed 8 years ago

Make checkpatch style modification for
CHECK: Alignment should match open parenthesis

Signed-off-by: Walt Feasel <waltfeasel@gmail.com>

Emmanuel Vadot authored 8 years ago and Tom Rini committed 8 years ago

If a subsystem wasn't configured, avoid enumeration.

Signed-off-by: Emmanuel Vadot <manu@bidouilliste.com>

When CONFIG_API is selected with DM_ETH this
error is present:
api/api_net.c: In function 'dev_enum_net':
api/api_net.c:61:35: warning: initialization from incompatible pointer
type
  struct eth_device *eth_current = eth_get_dev();
                                   ^
api/api_net.c:68:39: error: dereferencing pointer to incomplete type
  memcpy(di->di_net.hwaddr, eth_current->enetaddr, 6);
                                       ^
Disable api_net functions when ETH_DM is selected.

Signed-off-by: Chris Johns <chrisj@rtems.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Stanislav Galabov authored 9 years ago and Daniel Schwierzeck committed 8 years ago

Specifically tested on MIPS under QEMU (works with all  combination of bit-ness and endian-ness)

Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>

This option currently enables both the command and the SCSI functionality.
Rename the existing option to CONFIG_SCSI since most of the code relates
to the feature.

Signed-off-by: Simon Glass <sjg@chromium.org>

The current name is too generic. Add a 'blk_' prefix to aid searching and
make its purpose clearer.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>

Use 'struct' instead of a typdef. Also since 'struct block_dev_desc' is long
and causes 80-column violations, rename it to struct blk_desc.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>

Stanislav Galabov authored 9 years ago and Tom Rini committed 9 years ago

This patch makes the U-Boot api export its structure address as an environment
variable, so it can be used to directly hint FreeBSD's loader of api's location.

The relevant FreeBSD loader change is currently under review at:
https://reviews.freebsd.org/D5492



Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>

Stanislav Galabov authored 9 years ago and Tom Rini committed 9 years ago

This patch adds U-Boot API support (used by FreeBSD loader) for MIPS platforms.

Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>

Stephen Warren authored 9 years ago and Tom Rini committed 9 years ago

This will allow the implementation to make use of data in the block_dev
structure beyond the base device number. This will be useful so that eMMC
block devices can encompass the HW partition ID rather than treating this
out-of-band. Equally, the existence of the priv field is crying out for
this patch to exist.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

Andreas Färber authored 9 years ago and Tom Rini committed 9 years ago

When enabling CONFIG_API and chain-loading GRUB2 on jetson-tk1, only the
eMMC would show up as (hd0), but not the SD card, leading to GRUB not
finding its configuration and modules, falling back to a rescue shell.

This is because enum_ended would get set for !more after returning a
cookie for the first MMC device in group 3.

Fix this by properly setting the "more" argument also in the case of the
first storage device of a group.

Signed-off-by: Andreas Färber <afaerber@suse.de>

Joe Hershberger authored 9 years ago and Simon Glass committed 9 years ago

This value is not used by the network stack and is available in the
global data, so stop passing it around.  For the one legacy function
that still expects it (init op on old Ethernet drivers) pass in the
global pointer version directly to avoid changing that interface.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reported-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
(Trival fix to remove an unneeded variable declaration in 4xx_enet.c)

Provide stubs in case that no NET interface is supported.

Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>

Masahiro Yamada authored 11 years ago and Tom Rini committed 11 years ago

Before this commit, CONFIG_MPC8260 and CONFIG_8260
were used mixed-up.

All boards with mpc8260 cpu defined both of them:
  - CONFIG_MPC8260 was defined in board config headers
      and include/common.h
  - CONFIG_8260 was defined arch/powerpc/cpu/mpc8260/config.mk

We do not need to have both of them.
This commit keeps only CONFIG_MPC8260.

This commit does:
 - Delete CONFIG_8260 and CONFIG_MPC8260 definition
   in config headers and include/common.h
 - Rename CONFIG_8260 to CONFIG_MPC8260
    in arch/powerpc/cpu/mpc8260/config.mk.
 - Rename #ifdef CONFIG_8260 to #ifdef CONFIG_MPC8260

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>

Masahiro Yamada authored 11 years ago and Tom Rini committed 11 years ago

All objects under api/ and examples/api/ directories are selected
by CONFIG_API.
So we can move CONFIG_API switch to the top Makefile.

In order to use CONFIG_API, the definition of SUBDIR_EXAMPLES-y
must be moved after "sinlude $(obj)include/autoconf.mk".

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

Masahiro Yamada authored 11 years ago and Tom Rini committed 11 years ago

All objects under api/ and examples/api/ directories are selected
by CONFIG_API.
So we can move CONFIG_API switch to the top Makefile.

In order to use CONFIG_API, the definition of SUBDIR_EXAMPLES-y
must be moved after "sinlude $(obj)include/autoconf.mk".

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

Masahiro Yamada authored 11 years ago and Tom Rini committed 11 years ago

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>

The Freescale MPC8220 Power Architecture processors have long reached
EOL; Freescale does not even list these any more on their web site.

Remove the code to avoid wasting maitaining efforts on dead stuff.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Andy Fleming <afleming@gmail.com>

Jeroen Hofstee authored 12 years ago and Anatolij Gustschin committed 11 years ago

cc: Che-Liang Chiou <clchiou@chromium.org>
Acked-by: Che-Liang Chiou <clchiou@chromium.org>
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>

Che-Liang Chiou authored 13 years ago and Anatolij Gustschin committed 13 years ago

This patch exports LCD info-query and bitmap-rendering functions to
external apps.

This patch is tested on a Seaboard.  Because the LCD driver is not yet
upstreamed, the test was done in a local downstream repo.

Signed-off-by: Che-Liang Chiou <clchiou@chromium.org>

Mike Frysinger authored 13 years ago and Wolfgang Denk committed 13 years ago

This is long over due.  All but two net drivers have been converted, but
those have now been dropped.

The only thing left to do is actually delete all references to NET_MULTI
and code that is compiled when that is not defined.  So here we scrub the
core code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>