- May 15, 2024
-
-
Tom Rini authored
Hari Nagalla <hnagalla@ti.com> says: This series adds relevant ip data in remoteproc driver for AM62a devices. Logs: https://paste.sr.ht/~hnagalla/5e20838705c1d688bca81886dad56451b56d3913
-
Add AM62a remote proc firmware names to environment variables for loading of C7x DSP and R5F processors. Signed-off-by:
Hari Nagalla <hnagalla@ti.com> Reviewed-by:
Devarsh Thakkar <devarsht@ti.com>
-
Enable K3-DSP and K3-R5FSS remote proc drivers for am62ax. Signed-off-by:
-
AM62A has a R5F core in MCU voltage domain. Extend support for R5F remote proc driver on AM62A with compatible strings. Signed-off-by:
-
AM62A SoC has a single C71x DSP subsystem with analytics engine in main voltage domain. Extend support to AM62A with compatible strings. Signed-off-by:
-
Tom Rini authored
Martyn Welch <martyn.welch@collabora.com> says: This series adds DFU support for TI AM62 SK and beagleplay boards. I have picked this series up from Sjoerd due to time constraints. Since the last revision: * Removed dwc3 mode setting in favour of reinstating forced peripheral mode for usb0 * Use of config fragments for both r5 and a53 DFU configuration to reduce duplication * Typographical improvements to documentation We plan to also submit the dts changes to linux so that those can be dropped again in the near future (hopefully)
-
Both AM62 SK and beagleplay support DFU boot in a similar way now; Document how to actually run DFU boot for both boards Signed-off-by:
Sjoerd Simons <sjoerd@collabora.com> Reviewed-by:
Mattijs Korpershoek <mkorpershoek@baylibre.com> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # on beagle play Signed-off-by:
Martyn Welch <martyn.welch@collabora.com>
-
DFU mode on a beagleplay can be used via the Type-C connector by holding the USR switch while powering on. Configuration is already provided as fragments for both the A53 and R5 u-boot parts. Include the am62x_a53_usbdfu.config config. The am62x_r5_usbdfu.config fragment needs to be added should DFU boot be required as this will disable booting from persistent storage due to binary size constraints. Signed-off-by:
-
Provide config fragments to enable USB host as well as USB gadget and DFU support for a53 and r5. This relevant fragment is included into the am62x EVM a53 defconfig. For the r5, due to the smaller available size, the config fragment also disables support for persistent storage to free up space for USB support. This fragment needs to be included is DFU booting is desired. The CONFIG_DFU_SF option is placed in the defconfig rather than the fragment as this is known not to be supported on all boards that can support DFU. Signed-off-by:
-
Enable usb0 in all boot phases for use with DFU Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@siemens.com> Signed-off-by:
-
Include standard TI K3 dfu environment Signed-off-by:
-
Add glue code for TI AM62 to the dwc3 driver; Most code adopted from TI vendor u-boot code. Signed-off-by:
-
- May 14, 2024
-
-
Tom Rini authored
- A few zfs fixes, ARMv8 timer cleanups, support more algorithms with the nuvoton crypto driver, virtio + env in filesystem fix, K3 code cleanup and warning fix in gen_compile_commands.
-
- May 13, 2024
-
-
Each SoC now has a directory in mach-k3, let's move the SoC specific files into their respective directories. Signed-off-by:Andrew Davis <afd@ti.com>
-
Since Python 3.12 unrecognised escape sequences trigger a SyntaxWarning. Convert the '\#' string to a raw string so the backslash is correctly used as a literal. Ported from Linux commit dae4a0171e25 ("gen_compile_commands: fix invalid escape sequence warning"). This updates the script to be in-line with Linux 6.9-rc6. Signed-off-by:Caleb Connolly <caleb.connolly@linaro.org> Reviewed-by:
João Marcos Costa <jmcosta944@gmail.com>
-
Specifying a file in an EXT4 or FAT partition on a virtio device as environment location failed because virtio hadn't been initialized by the time the environment was loaded. This patch mirrors commit 54ee5ae8 ("Add SCSI scan for ENV in EXT4 or FAT") in issue and fix, just for a different kind of block device. The additional include in include/virtio.h is needed so all functions called there are defined, the alternative would have been to include dm/device.h separately in the env/ sources. Checkpatch suggests using "if (IS_ENABLED(CONFIG...))" instead of "#if defined(CONFIG_...)", I'm sticking to the style of the existing code here. Signed-off-by:
Fiona Klute <fiona.klute@gmx.de> CC: Joe Hershberger <joe.hershberger@ni.com> CC: Bin Meng <bmeng.cn@gmail.com> CC: Rogier Stam <rogier@unrailed.org>
-
Polling cntpct_el0 in a tight loop for delays is inefficient. This is particularly apparent on Arm FVPs, which do not simulate real time, meaning that a 1s sleep can take a couple of orders of magnitude longer to execute in wall time. If running at EL2 or above (where CNTHCTL_EL2 is available), enable the cntpct_el0 event stream temporarily and use wfe to implement the delay more efficiently. The event period is chosen as a trade-off between efficiency and the fact that Arm FVPs do not typically simulate real time. This is only implemented for Armv8 boards, where an architectural timer exists, and only enabled by default for the ARCH_VEXPRESS64 board family. Signed-off-by:
Peter Hoyes <Peter.Hoyes@arm.com> Reviewed-by:
Andre Przywara <andre.przywara@arm.com>
-
The sev() and wfe() asm macros are currently defined only for mach-exynos. As these are common Arm instructions, move them to the common asm/system.h header file, for both Armv7 and Armv8, so they can be used by other machines. wfe may theoretically trigger a context switch if an interrupt occurs so add a memory barrier to this call. Signed-off-by:
Andre <Przywara<andre.przywara@arm.com>
-
The 2 bytes 0xffff is too short for being a PowerPC instruction, resulting in an error similar to: /tmp/ccW8yjie.s: Assembler messages: /tmp/ccW8yjie.s: Error: unaligned opcodes detected in executable segment /tmp/ccW8yjie.s:223: Error: instruction address is not a multiple of 4 make[2]: *** [/tmp/ccyF4HIC.mk:17: /tmp/ccCKUFuF.ltrans5.ltrans.o] Error 1 Signed-off-by:WHR <msl0000023508@gmail.com>
-
In order to prevent crashing due to infinite recursion and actually decompress the requested data, call the zlib function 'uncompress' instead. Signed-off-by: -
Currently no features are implemented, only the zpool version 5000 that indicating the features support, is recognized. Since it is possible for OpenZFS to create a pool with features support enabled, but without enabling any actual feature, this change enables U-Boot to read such pools. Signed-off-by: -
1. Use vendor naming rule to rename each function 2. add SHA 384/512 support Signed-off-by:Jim Liu <JJLIU0@nuvoton.com>
-
- May 10, 2024
-
-
Tom Rini authored
MD Danish Anwar <danishanwar@ti.com> says: This series adds AM64x related compatibles to PRUSS and PRU_RPROC drivers. This series is a prerequisite for ICSSG Ethernet driver. Once Support for AM64x is added to PRUSS and PRU_RPROC driver, I'll send another series to enable ICSSG Ethernet driver for AM64x as well.
-
Tom Rini authored
Neha Malcom Francis <n-francis@ti.com> says: Add support for missing HS SRs in the build for J721E and J7200. Boot logs (updated for v2): https://gist.github.com/nehamalcom/e652752623537aced8cf31308015d7c9
-
Tom Rini authored
Wadim Egorov <w.egorov@phytec.de> says: Factor out code that we can reuse across all our K3 based SoMs. 2nd patch of this series require patch [1] to be applied first. [1] https://lists.denx.de/pipermail/u-boot/2024-April/552021.html
-
Let's provide get_boot_device() for AM64, similar to what we did in commit 2f9095e2 ("arm: mach-k3: am625: Provide a way to obtain boot device for non SPLs") for AM62. Signed-off-by:
Wadim Egorov <w.egorov@phytec.de>
-
Add support for AM64x by adding it's compatible in pruss driver. Signed-off-by:
MD Danish Anwar <danishanwar@ti.com> Reviewed-by:
Roger Quadros <rogerq@kernel.org>
-
Add support for AM64x PRU cores by adding compatibles for AM64x. Signed-off-by:
-
J7200 has SR1.0 and SR2.0 having three variants of each GP, HS-FS and HS-SE. Current build does not generate HS-SE SR1.0 and HS-FS SR1.0 so add support for them. Reported-by:
Suman Anna <s-anna@ti.com> Reported-by:
Aniket Limaye <a-limaye@ti.com> Signed-off-by:
Neha Malcom Francis <n-francis@ti.com> Reviewed-by:
-
J721E has SR1.1 and SR2.0 having three variants of each GP, HS-FS and HS-SE. Current build does not generate HS-FS SR1.1 so add support for them. Reported-by:
-
Enable CONFIG_BOARD_LATE_INIT to use PHYTECs common board_late_init() to set handy environment variables for u-boot. Also, resync after savedefconfig. Signed-off-by: -
Environment handling code can be reused across all our K3 based SoMs. Instead of adding the same code for every new SoM, move it to a common board.c file. Signed-off-by:
-
- May 08, 2024
-
-
Tom Rini authored
Currently we have the option to tell the console code that we should ignore the SPL banner. We also have an option to say that we can see it a second time, and ignore it. However, some platforms such as TI AM64x will have us see the SPL banner three times. Rather than add an "spl3_skipped" option, rework the code. By default we expect to see the banner once, but boards can specify seeing it as many times as they expect to. Signed-off-by:Tom Rini <trini@konsulko.com>
-
This driver support the Synopsys Designware Ethernet 10G IP block refer from the driver dwc_eth_qos. The driver MAC register mapping is different between Synopsys QoS IP and Synopsys 10G IP, and thus new file is created meant for Sysnopsys 10G IP. The dwc_eth_xgmac_socfpga.c is specific to a device family, the driver support the specific configuration used in Intel SoC FPGA Agilex5. This driver is extensible for other device family to use. Signed-off-by:Boon Khai Ng <boon.khai.ng@intel.com>
-
Tom Rini authored
Greg Malysa <greg.malysa@timesys.com> says: This series adds support for the ADI SC5xx machine type and includes two core drivers that are required for being able to boot any board--a UART driver, the gptimer driver which is used as a clock reference (CNTVCNT is not supported on the armv7 sc5xx SoCs) and the clock tree driver. Our corresponding Linux support relies on u-boot configuring the clocks correctly before booting, so it is not possible to boot any board without the CGU/CDU configuration happening here. There are also no board files, device trees, or defconfigs included here, but some common definitions that will be used to build board files currently are. The sc5xx SoCs themselves include many armv7 families (sc57x, sc58x, and sc594) all using an ARM Cortex-A5, and one armv8 family (sc598) indended to be a drop-in replacement for the SC594 in terms of peripherals, with a Cortex-A55 instead. Some of the configuration code in dmcinit and clkinit is quite scary and causes a lot of checkpatch violations. It is modified from code initially provided by ADI, but it has not been fully rewritten. There's a question of how important it is to clean up this code--it has some quality violations, but it has been in use (including in production) for over two years and is known to work for performing the low level SoC initialization, while a rewrite might introduce timing or sequence bugs that could take a significant amount of time to detect in the future.
-
Co-developed-by:
Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by:
Angelo Dureghello <angelo.dureghello@timesys.com> Signed-off-by:
Ian Roberts <ian.roberts@timesys.com> Signed-off-by:
Greg Malysa <greg.malysa@timesys.com>
-
Co-developed-by:
Vasileios Bimpikas <vasileios.bimpikas@analog.com> Signed-off-by:
Utsav Agarwal <utsav.agarwal@analog.com> Signed-off-by:
Arturs Artamonovs <arturs.artamonovs@analog.com> Signed-off-by:
-
This adds support for the SC5XX clock trees which are required for reading clock speeds on the SoCs. This is largely a port of the same support for Linux, which has not yet been submitted upstream. Co-developed-by:
-
Add support for the SC5xx machine type from Analog Devices. This includes support for the SC57x, SC58x, SC59x, and SC59x-64 SoCs, which have many common features such as common ADI IP blocks, and SHARC DSP cores. This commit introduces core functionality required for all boards using an SC5xx SoC, such as: - SPL configuration - Required CPU hooks such as reset - Boot ROM interaction to load the stage 2 bootloader in the reference configuration. Other options are possible but not officially supported at this time - SoC-common configuration expected to be reused by all boards - Early initialization for system clocks and DDR controller Co-developed-by:
-
- May 07, 2024
-
-
Tom Rini authored
- Merge the four series that I made to finally remove include/common.h. For the most part, this is just removing <common.h> entirely. In a few cases we needed to add <linux/types.h> or <time.h>. In the case of PowerPC related code, we instead need to bring in <asm/ppc.h>.
-
