- Jul 11, 2023
-
-
Tom Rini authored
When tagging and releasing v2023.07 I forgot to drop the -rc6 tag. For regular use, I've made a v2023.07.01 tag, but for here we can just drop the -rc6 tag. Signed-off-by:Tom Rini <trini@konsulko.com>
-
- Jul 10, 2023
-
-
Tom Rini authored
-
Tom Rini authored
Signed-off-by: -
Tom Rini authored
Merge tag 'fsl-qoriq-2023-7-6' of https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq into next Enable DM Serial for ls1043ardb and ls1046ardb/afrwy Fixed secure boot on LS-CH2 platforms
-
- Jul 08, 2023
-
-
Tom Rini authored
- Correct a few dependencies in Kconfig and better handle some generated files so that they are properly cleaned later.
-
- Jul 07, 2023
-
-
DM_GPIO depends on GPIO to be enabled but select will cause that DM_GPIO is selected without GPIO which ends up in compilation error: undefined reference to `dm_gpio_set_value' undefined reference to `dm_gpio_get_value' undefined reference to `dm_gpio_free' undefined reference to `gpio_request_by_name' Signed-off-by:
Michal Simek <michal.simek@amd.com> [trini: Fix configs which had relied on these select's] Signed-off-by:
-
As implemented in the arch/arm/mach-rockchip/tpl.c file, the CONFIG_TPL_BANNER_PRINT option will not work if either of these options is not enabled. Add dependency constraints to the CONFIG_TPL_BANNER_PRINT option definition to prevent configuration problems where option is enabled but do not take effect. Suggested-by:
Yanjie Ren <renyanjie01@gmail.com> Signed-off-by:
Ying Sun <sunying@nj.iscas.ac.cn>
-
CONFIG_SYS_CONSOLE_ENV_OVERWRITE is implemented in common/console.c when "#if CONFIG_IS_ENABLED(SYS_CONSOLE_IS_IN_ENV)" is met. It is recommended to add dependency constraints to its definition. Suggested-by:
-
CONFIG_CMD_SAVES is used to enable support for the "saveenv" command and is only implemented in cmd/load.c when "#if defined(CONFIG_CMD_LOADS)" is met. It is recommended to add dependency constraints to its definition. Prevents "saveenv" command from not being supported when "CONFIG_CMD_SAVES=y CONFIG_CMD_LOADS=n". Suggested-by:
Simon Glass <sjg@chromium.org>
-
Docs describe 'make clean' to delete most generated files, 'make mrproper' to delete current configuration and all generated files. This test tries to assert it. Idea is to search remaining files by patterns in copies of the initial out-of-source build, which has two advantages: - looking in an out-of-source build dir allows to tell generated source code from committed source code - copying is fast (compared to rebuilding each time) which allows to do a "world clean" Signed-off-by:Tobias Deiminger <tdmg@linutronix.de>
-
sandbox can generate DT overlays, but they were not cleaned. Extend the explicit clean-files list accordingly. Fixes: 95300f20 ("pytest: add sandbox test for "extension" command") Signed-off-by:
-
'make clean' did not descend into arch/$ARCH/dts for arc, m68k, nios2, sh, xtensa. Fix it by adding the missing archs to the explicit clean-dirs list. Signed-off-by: -
VPL artifacts like example vpl/u-boot-vpl are currently not removed by 'make clean'. We can clean them just as it's already done for SPL and TPL. Fixes: f86ca5ad ("Introduce Verifying Program Loader (VPL)") Signed-off-by:
-
Tell git that auto-generated C sources are now exclusively expected under tools/generated/. Signed-off-by: -
On 'make clean', generated C files in tools/env/ and tools/boot/ are currently not removed, but they should. Auto-generation for shared sources was first introduced with ad80c4a3 ("kbuild, tools: generate wrapper C sources automatically by Makefile"). Cleanup later regressed (see Fixes:), because shared files were moved out of lib/ and common/, but 'clean-dirs := lib common' was not adjusted accordingly. Further, the generated tools/env/embedded.c became a sibling to project files, which prevents directory-wise cleanup at all. To solve it, we establishe tools/generated/ as the sole place for generated sources. Wrappers are now generated as tools/generated/<orig_dirname>/<orig_filename>, and 'make clean' can remove tools/generated/ as a whole (Linux Makefile.asm-generic headers are cleaned similarly). This way we don't have to maintain separate clean-files or clean-dirs entries for each single added or moved wrapper file. Fixes: 0649cd0d ("Move environment files from common/ to env/") Fixes: 19a91f24 ("Create a new boot/ directory") Signed-off-by:
-
This was not done when the tree name was changed, fix it now. Signed-off-by:Eugen Hristev <eugen.hristev@collabora.com>
-
- Jul 06, 2023
-
-
-
https://source.denx.de/u-boot/custodians/u-boot-riscvTom Rini authored
- RISC-V CI OpenSBI version update - Andes ae350 board modification - Sync PolarFire SoC dts with Linux - Support building ubifs
-
Yu Chien Peter Lin authored
The 'booti' command is unable to boot Image.gz due to the absence of required environment variables 'kernel_comp_addr_r' and 'kernel_comp_size'. This commit adds these variables and reorganizes the memory layout to prevent any overlap between binaries and files. Signed-off-by:
Yu Chien Peter Lin <peterlin@andestech.com> Reviewed-by:
Leo Yu-Chi Liang <ycliang@andestech.com>
-
Yu Chien Peter Lin authored
On some AE350 boards, we need to explicitly initialize the priority registers to a non-zero value so the boot hart can instruct secondary harts to jump to OpenSBI. This patch also updates the information about PLICSW. Signed-off-by:
-
Heinrich Schuchardt authored
Describe which numeric values can be used for as scratch options for OpenSBI. Signed-off-by:
Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by:
Anup Patel <anup@brainfault.org>
-
Hoegeun Kwon authored
There is a problem that the rates of PLL0 and PLL1 are set incorrectly because the postdiv1_mask value is incorrectly entered when setting the pll clk reg. Modify postdiv1's mask value to be put correctly. Signed-off-by:
Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by:
Minkyu Kang <mk7.kang@samsung.com>
-
Bin Meng authored
Use the latest OpenSBI v1.2 release binaries for the RISC-V CI. Signed-off-by:
Bin Meng <bmeng@tinylab.org> Reviewed-by:
-
Conor Dooley authored
The dts sync from Linux leaves mac0/ethernet1 enabled on icicle, but U-Boot does not currently set a mac address for it. Expand on the code which currently sets the mac for mac1/ethernet0 to optionally set the mac address for the second ethernet. Reviewed-by:
Padmarao Begari <padmarao.begari@microchip.com> Tested-by:
Conor Dooley <conor.dooley@microchip.com>
-
Conor Dooley authored
The "notable" disappearances are: - the pac193x stanza - there's nothing in mainline linux w.r.t. bindings for this & what is going to appear in mainline linux is going to be incompatible with what is currently in U-Boot. - operating points - these operating points should not be set at the soc.dtsi level as they may not be possible depending on the design programmed to the FPGA - clock output names - there are defines for the clock indices, these should not be needed - the dt maintainers in linux NAKed using defines for IRQ numbers - the qspi nand, which is not part of the icicle's default configuration is removed. Reviewed-by:
Rick Chen <rick@andestech.com>
-
Conor Dooley authored
The original names picked for the DT doesn't match Linux's naming scheme and it was renamed there a while ago. Rename it in U-Boot to allow easily syncing dts between the two projects. Reviewed-by:
-
Ben Dooks authored
If we're building non FU540/FU740 SoC drivers, then the sifive-prci.o is not needed. Only build this when CONFIG_CLK_SIFIVE_PRCI is selected. Signed-off-by:
Ben Dooks <ben.dooks@sifive.com> Reviewed-by:
-
Ben Dooks authored
These seem to be missing, and trying to build ubifs without them is causing errors due to these being missing. Signed-off-by:
-
Ben Dooks authored
Add implementations of the local_irq_{save,restore} macros so that <asm/atomic.h> can be used with riscv. Signed-off-by: -
Ben Dooks authored
Add a link from <asm/atomic.h> to the generic one to allow things like ubifs to be built. This can be extended with riscv AMO ops at a later date. Signed-off-by:
-
Heinrich Schuchardt authored
OpenSBI already implements some extensions that are not ratified yet: * Debug Console Extension (DBCN) * System Suspend Extension (SUSP) * Collaborative Processor Performance Control Extension (CPPC) Allow the sbi command to display these. Provide the FID definitions of the Debug Console Extension. We can use that extension for an early debug console driver. Signed-off-by:
-
pimg64 image pointer is dependent on ESBC_ADDR_64BIT config, which is getting disabled, due to dependency on ESBC_HDR_LS. ESBC_HDR_LS is required for LS-CH3 platforms. So, removing the dependency on ESBC_HDR_LS. Signed-off-by:
Kshitiz Varshney <kshitiz.varshney@nxp.com> Acked-by:
Peng Fan <peng.fan@nxp.com> Reviewed-by:
Gaurav Jain <gaurav.jain@nxp.com>
-
As the serial devices are configured in the device tree, enable DM_SERIAL in the ls1046afrwy defconfigs. Signed-off-by:
Camelia Groza <camelia.groza@nxp.com> Signed-off-by:
-
As the serial devices are configured in the device tree, enable DM_SERIAL in the ls1046ardb defconfigs. Signed-off-by:
-
Make sure the serial driver is initialized before relocation by tagging the serial nodes with "bootph-all". In order to keep the serial nodes in sync with their representation in the Linux dts, add these u-boot specific properties to *-u-boot.dtsi files. Signed-off-by:
-
Pick up the serial node descriptions from Linux v6.3 for the ls1046ardb and ls1046afrwy boards and their dependencies. Including the fsl,qoriq-clockgen.h and arm-gic.h headers forces us to change the include directives to explicitly go through the C preprocessor for all boards in the ls1046a SoC family. Signed-off-by:
-
As the serial devices are configured in the device tree, enable DM_SERIAL in the ls1043ardb defconfigs. Signed-off-by:
-
Make sure the serial driver is initialized before relocation by tagging the serial nodes with "bootph-all". In order to keep the serial nodes in sync with their representation in the Linux dts, add these u-boot specific properties to *-u-boot.dtsi files. Signed-off-by:
-
Pick up the serial node descriptions from Linux v6.3 for the ls1043ardb board and its dependencies. Including the fsl,qoriq-clockgen.h and arm-gic.h headers forces us to change the include directives to explicitly go through the C preprocessor for all boards in the ls1043a SoC family. Signed-off-by:
-
- Jul 05, 2023
-
-
Compiling on armv7 results in: tools/renesas_spkgimage.c: In function ‘spkgimage_parse_config_line’: tools/renesas_spkgimage.c:76:66: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘size_t’ {aka ‘unsigned int’} [-Wformat=] 76 | "config error: unknown keyword on line %ld\n", | ~~^ | | | long int | %d 77 | line_num); | ~~~~~~~~ | | | size_t {aka unsigned int} The correct printf specifier for size_t is '%zu'. Fixes: afdfcb11 ("tools: spkgimage: add Renesas SPKG format") Signed-off-by:Marek Vasut <marek.vasut+renesas@mailbox.org>
-
