Pull request efi-2024-04-rc1-4

Documentation:

* uefi: remove ".py" suffix for pytest.py command
* correct date in migration plan for CONFIG_DM

UEFI:

* fix conflicting SPDX license in RISC-V EFI linker scripts
* page align EFI binary section in RISC-V EFI binaries
* separate .data and .text sections of RISC-V EFI binaries
* use common function to get EFI configuration table

Quentin Schulz authored 1 year ago and Tom Rini committed 1 year ago

SafeConfigParser was renamed back in Python 3.2 (yes, no typo) to
ConfigParser[1], but it was still working as an alias until it got
removed in 3.12[2].

[1] https://docs.python.org/3.8/whatsnew/3.2.html#configparser
[2] https://github.com/python/cpython/pull/92503



Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>

Janne Grunau authored 1 year ago and Tom Rini committed 1 year ago

vidconsole_ops.get_font is documented to return -ENOENT after the last
video_fontdata entry.

Signed-off-by: Janne Grunau <j@jannau.net>

Janne Grunau authored 1 year ago and Tom Rini committed 1 year ago

Without explicit support for VIDEO_X2R10G10B10 VIDEO_X8R8G8B8 white
will be rendered as cyan-ish. The conversion leaves to lowest 2 bits
unset for more compact code.

Signed-off-by: Janne Grunau <j@jannau.net>

Ralph Siemsen authored 1 year ago and Tom Rini committed 1 year ago

In the non-redundant code for env_sf_save(), a failure to malloc() the
temporary buffer produces the following output:

    Saving Environment to SPIFlash... OK

This is misleading as the flash has neither been erased nor written.

Fix it to return an error to the caller, so the output will be:

    Saving Environment to SPIFlash... Failed (-12)

Note that there is another copy of env_sf_save() in the same file, for
handling redundant environment, and it already has the same logic.

Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>

Devarsh Thakkar authored 1 year ago and Tom Rini committed 1 year ago

Use device-tree node property names for parsing nodes instead of
indexing as indexing could be different between different SoCs based on
number of DSS entities available on that particular SoC.

Also correct the video layer naming in driver to match to actual one
being used in upstream DSS device-tree node [1].

This also fixes AM62x splash screen usage using the latest upstream DSS
device-tree nodes where hard-coded indexing which driver was using
before this patch was not matching the correct properties in the DT
node.

[1]: Upstream AM62x DSS node:
https://github.com/torvalds/linux/blob/v6.8-rc1/arch/arm64/boot/dts/ti/k3-am62-main.dtsi#L774



Fixes: 5f9f816b ("drivers: video: tidss: TIDSS video driver support for AM62x")
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Nikhil M Jain <n-jain1@ti.com>

Devarsh Thakkar authored 1 year ago and Tom Rini committed 1 year ago

Don't compile ubifs splash mount command for SPL build as this command
is not supported (and also not enabled) during SPL stage.

This fixes below compilation error, when CONFIG_CMD_UBIFS is enabled in
defconfig along with splash screen enabled at SPL stage:

"aarch64-none-linux-gnu-ld.bfd: common/cli.o: in function `run_command':
u-boot-next/u-boot/common/cli.c:51: undefined reference to
`parse_string_outer'
u-boot-next/u-boot/common/cli.c:51:(.text.run_command+0x10): relocation
truncated to fit: R_AARCH64_JUMP26 against undefined symbol
`parse_string_outer' make[2]: ***
[u-boot-next/u-boot/scripts/Makefile.spl:527: spl/u-boot-spl] Error 1
make[1]: *** [u-boot-next/u-boot/Makefile:2053: spl/u-boot-spl] Error 2
make[1]: Leaving directory 'u-boot-next/u-boot/out/a53' make: ***
[Makefile:177: sub-make] Error 2"

Fixes: eb9217dc ("common: Enable splash functions at SPL")
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Nikhil M Jain <n-jain1@ti.com>

Devarsh Thakkar <devarsht@ti.com> says:

Move video memory reservation for SPL at end of RAM so that it does
not interefere with reservations for next stage so that the next stage
need not have holes in between for passed regions and instead it can
maintain continuity in reservations.

Also catch the bloblist before starting reservations to avoid the same
problem.

While at it, also fill missing fields in video handoff struct before
passing it to next stage.

This is as per discussions at :
For moving SPL framebuffer reservation at end of RAM:

https://lore.kernel.org/all/CAPnjgZ3xSoe_G3yrqwuAvoiVjUfZ+YQgkOR0ZTVXGT9VK8TwJg@mail.gmail.com/

For filling missing video handoff fields :
https://lore.kernel.org/all/CAPnjgZ1Hs0rNf0JDirp6YPsOQ5=QqQSP9g9qRwLoOASUV8a4cw@mail.gmail.com/

Devarsh Thakkar authored 1 year ago and Tom Rini committed 1 year ago

Add details regarding scheme which need to be followed in SPL and
further stages for those regions which need to be preserved across
bootstages.

Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Simon Glass <sjg@chromium>

Devarsh Thakkar authored 1 year ago and Tom Rini committed 1 year ago

Add info regarding splash screen, video, bloblist and GPIO related
Kconfigs which were missing in the documentation.

Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Simon Glass <sjg@chromium>

Devarsh Thakkar authored 1 year ago and Tom Rini committed 1 year ago

Fill video handoff fields in video_post_probe as at this point we have
full framebuffer-related information.

Also fill all the fields available in video hand-off struct as those
were missing earlier and U-boot framework expects them to be filled for
some of the functionalities.

While filling framebuffer size in video hand-off structure use the
actual framebuffer region size as derived from gd->video_top and
gd->video_bottom instead of directly using the size populated in
video_uc_plat as it contains unaligned size.

Reported-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Devarsh Thakkar authored 1 year ago and Tom Rini committed 1 year ago

Skip framebufer reservation if it was already reserved from previous
stage and whose information was passed using a bloblist.

Return error in case framebuffer information received from bloblist is
invalid i.e NULL or empty.

While at it, improve the debug message to make it more clear that
address in discussion is of framebuffer and not bloblist and also match
it with printing scheme followed in video_reserve function.

Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Devarsh Thakkar authored 1 year ago and Tom Rini committed 1 year ago

Start reservations needed for init sequence only after catching
bloblists from previous stage.

This is to avoid catching bloblists in the middle causing gaps while
u-boot is reserving.

Adjust the relocaddr as per video hand-off information received from
previous stage so that further reservations start only after regions
reserved for previous stages

Skip reservation for video memory if it was already filled by a
bloblist.

Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Devarsh Thakkar authored 1 year ago and Tom Rini committed 1 year ago

Remove video_setup from evm_init sequence since video memory is getting
called at an earlier place to make sure video memory is reserved at
the end of RAM.

Suggested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Devarsh Thakkar authored 1 year ago and Tom Rini committed 1 year ago

Setup video memory before page table reservation using
"spl_reserve_video_from_ram_top" which ensures framebuffer memory gets
reserved from the end of RAM.

This is done to enable the next stage to directly skip the
pre-reserved area from previous stage right from the end of RAM without
having to make any gaps/holes to accommodate those regions which was the
case before as previous stage reserved region not from the end of RAM.

Use gd->ram_top instead of local ram_top and update gd->reloc_addr after
each reservation to ensure further regions are reserved properly.

Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Nikhil M Jain <n-jain1@ti.com>

Devarsh Thakkar authored 1 year ago and Tom Rini committed 1 year ago

Add an API which enforces framebuffer reservation from end of RAM.
This is done so that next stage can directly skip this region before
carrying out further reservations.

Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Add entries for the recently added defconfig files. I had thought I had
committed these updates but lost them before pushing the branch.

Signed-off-by: Tom Rini <trini@konsulko.com>

- Support Infineon S28HS02GT (Takahiro)

- Some cleanups in header files: those do not affect the generated
  binaries at all.
- The usual update of DT files from the kernel repo, mostly adding new
  board files this time. On the wake of this there is one defconfig to
  enable a new board, some H618 TV box branded as "Transpeed".
- Samuel's series to support SPL FIT image loading for 32-bit SoCs as
  well, so far this was restricted to ARM64 boards. I refrained from
  automatically enabling this everywhere, instead this requires user
  intervention during board configuration. This allows to ship the
  "crust" management processor firmware on H3 boards, which enables
  better power saving.
- One defconfig for an older H3 board. There was a close-by defconfig
  for a related board, but there are some differences which deserve a
  separate file.
- Support for the EMAC driver to work with fixed-link PHYs, which allows
  to directly wire the MAC to a switch IC.

- Update pygit2 version and add a number of additional hardware pytests

Love Kumar authored 1 year ago and Tom Rini committed 1 year ago

Add a following test cases for scsi commands:
scsi_reset - To reset SCSI controller
scsi_info - To show available SCSI devices
scsi_scan - To (re-)scan SCSI bus
scsi_device - To show or set surrent device
scsi_part - To print partition table of selected SCSI device

Signed-off-by: Love Kumar <love.kumar@amd.com>

Love Kumar authored 1 year ago and Tom Rini committed 1 year ago

Add the test cases for usb commands to test its various functionality
such as start, stop, reset, info, tree, storage, dev, part, ls, load,
and save. It also adds different file systems cases such as fat32, ext2
and ext4.

Signed-off-by: Love Kumar <love.kumar@amd.com>

Love Kumar authored 1 year ago and Tom Rini committed 1 year ago

Add the test cases for mmc commands to test its various functionality
such as mmc list, dev, info, rescan, part, ls, load, and save. It also
adds different file systems cases such as fat32, ext2 and ext4.

Signed-off-by: Love Kumar <love.kumar@amd.com>

Love Kumar authored 1 year ago and Tom Rini committed 1 year ago

Add test cases to verify the different type of secure boot images loaded
at DDR location for AMD's ZynqMP SoC. It also adds tests authentication
and decryption functionality using AES and RSA features for Zynq.

Signed-off-by: Love Kumar <love.kumar@amd.com>

Love Kumar authored 1 year ago and Tom Rini committed 1 year ago

Add gpio pins generic test for the set of gpio pin list to test various
gpio related functionality, such as the input, set, clear, and toggle,
it also tests the input and output functionality for shorted gpio pins.
This test depends on boardenv* configuration to define gpio pins names.

Signed-off-by: Love Kumar <love.kumar@amd.com>

Love Kumar authored 1 year ago and Tom Rini committed 1 year ago

Add testcases for loading RPU applications in split and lockstep mode
including the negative one for AMD's ZynqMP SoC.

Signed-off-by: Love Kumar <love.kumar@amd.com>

Caleb Connolly authored 1 year ago and Tom Rini committed 1 year ago

Update pygit2 and py to their latest versions. Even in the venv pygit2
still links against the system libgit2 library which is failing on
latest Arch Linux.

The py library also needs updating to fix a KeyNotFound exception during
test initialisation.

Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>

Samuel Holland authored 1 year ago and André Przywara committed 1 year ago

Now that 32-bit SoCs can load U-Boot proper (and possibly other firmware)
from a FIT, people can use that by enabling CONFIG_SPL_LOAD_FIT.
However SPL_FIT_IMAGE_TINY is required to stay within the 24 or 32 KiB
SPL size limit on early SoCs; for consistency, enable it everywhere.

Signed-off-by: Samuel Holland <samuel@sholland.org>
[Andre: drop unconditional FIT image enablement for all SoCs]
Reviewed-by: Andre Przywara <andre.przywara@arm.com>

Samuel Holland authored 1 year ago and André Przywara committed 1 year ago

Some 32-bit SoCs can use SCP firmware to implement additional PSCI
functionality, such as system suspend. In order to load this firmware
from SPL, we need to generate and use a FIT instead of a legacy image.

Adjust the binman FIT definition so it does not rely on TF-A BL31, as
this is not used on 32-bit SoCs. Instead, after loading the firmware,
U-Boot proper is executed directly. This requires to provide an
entry point property for the U-Boot image node, which confuses some
loaders like sunxi-fel, so protect that to only be used if we have no
BL31.

Signed-off-by: Samuel Holland <samuel@sholland.org>
[Andre: filter U-Boot entry point property]
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Samuel Holland authored 1 year ago and André Przywara committed 1 year ago

This is easier to read than the #ifdef staircase, provides better
visibility into the memory map (alongside the other Kconfig
definitions), and allows these addresses to be reused from code.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>

Samuel Holland authored 1 year ago and André Przywara committed 1 year ago

Starting with H6, Allwinner removed the artificial 32 KiB SPL size limit
from the boot ROM. Now SPL size is only limited by the available SRAM.
This limit ranges from 152 KiB on H6 to a whopping 2052 KiB on R329. To
take advantage of this additional space, we must increase SPL_MAX_SIZE.
Since we do not want to unnecessarily pad SPL out to these giant sizes,
we must set SPL_PAD_TO to zero. This causes no problems because binman
already takes care of appending the SPL payload at the right offset.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>

Chuanhong Guo authored 1 year ago and André Przywara committed 1 year ago

FriendlyElec NanoPi Duo2 is a tiny SBC with Allwinner H3 and
Ampak AP6212 WiFi module. The device-tree for it is already
available in u-boot source tree. Add a default config for it.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
[Andre: enable USB gadgets]
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Maksim Kiselev authored 1 year ago and André Przywara committed 1 year ago

Make the "phy-handle" property optional, which allows support
for a fixed-link phy configuration.

Thus if the "phy-handle" is present in a DT, then driver will work as
before. Otherwise, phyaddr initialization will not be necessary,
as it is not needed in case of a fixed-link config.

Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>

Nick Alilovic authored 1 year ago and André Przywara committed 1 year ago

This is a Chinese TV box based on Allwinner H618 SoC.

The DRAM parameters were derived from the values found in a firmware update.

Signed-off-by: Nick Alilovic <nickalilovic@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>

Sync the devicetree files from the official Linux kernel tree, v6.8-rc1.
This time only small changes in the existing files, but five new boards
got added, which opens the door for their respective defconfig files.

As before, this omits the non-backwards compatible changes to the R_INTC
controller, to remain compatible with older kernels.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Infineon(Cypress) S28HS02GT is 1.8V, 2Gb (256MB) NOR Flash memory with
Octal interface. It is a dual-die package parts and has same features
with existing S28 series.

Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>

Enabling Octal DTR mode in multi-die package parts requires reister setup
for each die. That can be done by simple for-loop. write_enable() takes
effect to all die at once so we can call it before the loop. Besides we
can replace spi_mem_exec_op() calls with spansion_read/write_any_reg().
And finally, we must mask CFR2V[7:4] when changing dummy cycles, as
CFR2V[7] indicates current addressing mode and that should be 1 (4-byte
address mode) for multi-die package parts.

Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>

s28hx_t_post_bfpt_fixup() fixes erase opcode, erase size, and page size.
s25_post_bfpt_fixup() is doing same thing including multi-die support.
We can consolidate s28hx_t_post_bfpt_fixup() and s25_post_bfpt_fixup()
into one named s25_s28_post_bfpt_fixup().

In s25_s28_post_bfpt_fixup(), set_4byte() is called to force the device to
be 4-byte addressing mode. In S28HS02GT datasheet, the B7 opcode is missing
but it works actually (confirmed).

Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>

s28hx_t_setup() only checks sector layout setting. To support multi-die
package parts like S28HS02GT, it needs to check device size and assign
ready() hook for multi-die package parts. These are covered in s25_setup()
so we can consolidate s28hx_t_setup() and s25_setup() into one named
s25_s28_setup().

spi_nor_wait_till_ready() at the beginning of s28hx_t_setup() can be
removed since there is no op that makes device busy state before setup.

Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>

s25_mdp_ready() handles status polling for multi-die package parts that
requires to read and check status register for each die. To support
S28HS02GT(dual-die package with Octal DTR support), rename function and
use nor->rdsr_dummy in octal DTR mode.

Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>