-
xilinx-for-v2022.10
Xilinx changes for v2022.10 cpu: - Add driver for microblaze cpu net: - Add support for DM_ETH_PHY to AXI emac and emaclite xilinx: - Switch platforms to DM_ETH_PHY - DT chagnes in ZynqMP and Zynq - Enable support for SquashFS zynqmp: - Add support for KR260 boards - Move BSS from address 0 - Move platform identification from board code to soc driver - Improve zynqmp_psu_init_minimize versal: - Enable loading app at EL1 serial: - Setup default address and clock rates for DEBUG uarts pinctrl: - Add support for tri state and output enable properties relocate-rela: - Clean relocate-rela implementation for ARM64 - Add support for Microblaze microblaze: - Add support for runtime relocation - Rework cache handling (wiring, Kconfig) based on cpuinfo - Remove interrupt support timer: - Extract axi timer driver from Microblaze to generic location
-
xilinx-for-v2022.07-rc4-v2
Xilinx changes for v2022.07-rc4-v2 - Fix revision name (remove spaces)
-
xilinx-for-v2022.07-rc4
Xilinx changes for v2022.07-rc4 zynqmp: - Fix DP PLL configuration for zcu102/zcu106 and SOM - Fix split mode for starting R5s - DT fixes - Remove firmware node for mini configurations - Wire TEE for multi DTB fit image xilinx: - Handle board_get_usable_ram_top(0) properly phy: - Extend psgtr timeout mmc: - Fix mini configuration which misses zynqmp_pm_is_function_supported()
-
xilinx-for-v2022.07-rc1-v2
Xilinx changes for v2022.07-rc1 v2 xilinx: - Allow booting bigger kernels till 100MB zynqmp: - DT updates (reset IDs) - Remove unneeded low level uart initialization from psu_init* - Enable PWM features - Add support for 1EG device serial_zynq: - Change fifo behavior in DEBUG mode zynq_sdhci: - Fix BASECLK setting calculation clk_zynqmp: - Add support for showing video clock gpio: - Update slg driver to handle DT flags net: - Update ethernet_id code to support also DM_ETH_PHY - Add support for DM_ETH_PHY in gem driver - Enable dynamic mode for SGMII config in gem driver pwm: - Add driver for cadence PWM versal: - Add support for reserved memory firmware: - Handle PD enabling for SPL - Add support for IOUSLCR SGMII configurations include: - Sync phy.h with Linux - Update xilinx power domain dt binding headers
-
xilinx-for-v2022.07-rc1
Xilinx changes for v2022.07-rc1 microblaze: - Add support for reserved memory xilinx: - Update FRU code with MAC reading zynqmp: - Remove double AMS setting - DT updates (mostly for SOMs) - Add support for zcu106 rev 1.0 zynq: - Update nand binding nand: - Aligned zynq_nand to upstream DT binding net: - Add support for ethernet-phy-id mmc: - Workaround CD in zynq_sdhci driver also for ZynqMP - Add support for dynamic/run-time SD config for SOMs gpio: - Add driver for slg7xl45106 firmware: - Add support for dynamic SD config power-domain: - Update zynqmp driver with the latest firmware video: - Add skeleton driver for DP and DPDMA i2c: - Fix i2c to work with QEMU pinctrl: - Add driver for zynqmp pinctrl driver
-
xilinx-for-v2022.04-rc3
Xilinx changes for v2022.04-rc3 microblaze: - Fix exception handler zynqmp: - Show information about secure images - DT changes (som u-boot file removal) - Fix zynqmp_pm_cfg_obj_convert.py - Fix platform boot xilinx: - Fix bootm_size calculation - Remove GPIO_EXTRA_HEADER selection power: - Add zynqmp power management driver scsi: - Add phy support to ceva driver zynq qspi: - Fix unaligned accesses and check baudrate setup - Add support for spi memory operations net: - Fix 64bit calculation in axi_emac video: - Add missing gpio dependency for seps driver
-
xilinx-for-v2022.04-rc1
Xilinx changes for v2022.04-rc1 gpio: - Add modepin driver net: - Save random mac addresses to eth variable zynqmp gem: - Add support for mdio bus DT description - Add support for reset and SGMII phy configuration - Reduce timeout for MDIO accesses zynqmp clk: - Fix clock handling for gem and usb phy: - Add zynqmp phy/serdes driver serial: - Add one missing compatible string microblaze: - Symbol alignement - SPL fixups - Code cleanups zynqmp: - Various dt changes, DP pre-reloc, gem resets, gem clocks - Switch SOM to shared psu configuration - Move dcache handling to firmware driver - Workaround gmii2rgmii DT description issue - Enable broadcasts again - Change firmware enablement logic - Small adjustement in firmware driver versal: - Support new mmc@ DT nodes - Fix run time variable handling - Add missing I2C_PMC ID for power domain
-
xilinx-for-v2022.01-rc3
Xilinx changes for v2022.01-rc3 sdhci: - Fix emmc mini case with missing firmware interface zynqmp: - Restore JTAG interface if required - Allow overriding board name - Add support for DLC21 - Fix one fallthrought statement description - Use config macro instead of name duplication - Save multiboot to variable firmware: - Handle ipi_req errors better - Use local buffer in case user doesn't need it instead of NULL/0 location spi: - gqsi: Fix write issue at low frequencies net: - gem: Disable broadcasts
-
xilinx-for-v2022.01-rc1
Xilinx changes for v2022.01-rc1 zynq: - Enable capsule update for qspi and mmc - Update zed DT qspi compatible string zynqmp: - Add missing modeboot for EMMC - Add missing nand DT properties - List all eeproms for SC on vck190 - Add vck190 SC psu_init clk: - Handle only GATE type clock for Versal watchdog: - Update versal driver to handle system reset
-
xilinx-for-v2021.10-rc4
Xilinx changes for v2021.10-rc4 doc: - Fix uefi documentation spi: - Fix gqspi driver for single configuration
-
xilinx-for-v2021.10-rc3
Xilinx changes for v2021.10-rc3 xilinx: - Disable CONFIG_ARCH_FIXUP_FDT_MEMORY - Print information about cpu via soc drivers and enable DISPLAY_CPUINFO - Wire infrastructure for DTB_RESELECT and MULTI_DTB_FIT zynq: - Wire single QSPI - Use power-source instead of io-standard properties - Enable nor on zc770-xm012 zynqmp: - Change handling around multi_boot() - Setup offset for u-boot.itb in spi - Generate run time dfu_alt_info for capsule update - Use explicit values for enums (zynqmp_firmware.h) - Enable RTC/SHA1/BUTTON/BUTTON_GPIO command - Disable WDT driver by default - Bind usb/scsi via preboot because of EFI - DT updates/fixes - Add soc driver - Fix SPL SPI boot mode versal: - Add soc driver sdhci: - Update tap delay programming for zynq_sdhci driver cmd: - Fix RTC uclass handling in date command - Update pwm help message - Update reset help message watchdog: - Fix wwdt compilation rtc: - Deal with seq alias in rtc uclass - Add zynqmp RTC driver fdt: - Add kernel-doc for fdt_fixup_memory_banks()
-
xilinx-for-v2021.10-rc1
Xilinx changes for v2021.10-rc1 xilinx: - Use default ENVL_NOWHERE configuration - Add support for handling compressed kernels zynqmp: - SPL malloc size extension - USB2.0 for zc1751 dc2 - Fix USB3.0 nodes - Handle lpd_lsbus clock - Cleanup macros around SYSRESET versal: - Remove PBSIZE macro zynq_sdhci: - Tap delay fixups net: - Add support for MRMAC
-
xilinx-for-v2021.10
Xilinx changes for v2021.10 clk: - Add driver for Xilinx Clocking Wizard IP fdt: - Also record architecture in /fit-images net: - Fix plat/priv data handling in axi emac - Add support for 10G/25G speeds pca953x: - Add missing dependency on i2c serial: - Fix dependencies for DEBUG uart for pl010/pl011 - Add setconfig option for cadence serial driver watchdog: - Add cadence wdt expire now function zynq: - Update DT bindings to reflect the latest state and descriptions zynqmp: - Update DT bindings to reflect the latest state and descriptions - SPL: Add support for ECC DRAM initialization - Fix R5 core 1 handling logic - Enable firmware driver for mini configurations - Enable secure boot, regulators, wdt - Add support xck devices and 67dr - Add psu init for sm/smk-k26 SOMs - Add handling for MMC seq number via mmc_get_env_dev() - Handle reserved memory locations - Add support for u-boot.itb generation for secure OS - Handle BL32 handoffs for secure OS - Add support for 64bit addresses for u-boot.its generation - Change eeprom handling via nvmem aliases
-
xilinx-for-v2021.07-rc5
Xilinx changes for v2021.07-rc5 zynqmp: - Fix ANALOG_BUS value after powerup - Disable EFI_CAPSULE_ON_DISK_EARLY zynqmp-gqspi: - Fix write issue
-
xilinx-for-v2021.07-rc3
Xilinx changes for v2021.07-rc3 ZynqMP: - Syncup DT with Linux kernel - Fix mmc mini configurations via DT - Add pinctrl/psgtr description to DTs - Add DTs for Kria boards - Enable RTC and Time commands Versal: - Fix early BSS section location
-
xilinx-for-v2021.07-rc2
Xilinx changes for v2021.07-rc2 xilinx: - Enable saving variables based on bootmode - Cleanup usb dfu setup and wire it up with usb bootmode - Fix bootscript address logic - Remove GD references (spi, Versal) - Enable capsule update clk: - Small Kconfig fix net: - Fix gmii2rgmii bridge binding usb: - Propagate error (dfu gadget)
-
xilinx-for-v2021.07
Xilinx changes for v2021.07 net: - Fix gem PCS support spi: - Small trivial fixes zynq: - Enable time/timer commands - Update bitmain platform - Several DT changes zynqmp: - Update clock driver - mini config alignments - Add/update psu_init for zcu208/zcu216/zc1275 - Several DT changes - Enable efi debug command (also for Versal)
-
xilinx-for-v2021.04-rc3
Xilinx changes for v2021.04-rc3 qspi: - Support for dual/quad mode - Fix speed handling clk: - Add clock enable function for zynq/zynqmp/versal gem: - Enable clock for Versal - Fix error path - Fix mdio deregistration path fpga: - Fix buffer alignment for ZynqMP xilinx: - Fix reset reason clearing in ZynqMP - Show silicon version in SPL for Zynq/ZynqMP - Fix DTB selection for ZynqMP - Rename zc1275 to zcu1275 to match DT name
-
xilinx-for-v2021.04-v2
Xilinx changes for v2021.04-v2 env: - Unlock redundant variable configuration for all xilinx: - Enable seps525 by default - Export bootseq via variable - Update board_fdt_blob_setup() mmc: - Xenon macro removal
-
xilinx-for-v2021.04
Xilinx changes for v2021.04 arm64: - DT updates microblaze: - Add support for NOR device support spi: - Fix unaligned data write issue nand: - Minor code change xilinx: - Fru fix in limit calculation - Fill git repo link for all Xilinx boards video: - Add support for seps525 spi display tools: - Minor Vitis file support cmd/common - Minor code indentation fixes serial: - Uartlite debug uart initialization fix