---------------------------------

imx8: cleanup, fix warnings
imx6ull: add VisionSOM SoM and EVK
mx7ulp: fix warning due network, cleanup
mx7dsabre: Fix dm probe pmic
imx6: fixed for vining2000

Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/639512296

K3 J721E:
* DMA support.
* MMC and ADMA support.
* EEPROM support.
* J721e High Security EVM support.
* USB DT nodes

K3 AM654:
* Fixed boot due to pmic probe error.
* USB support and DT nodes.
* ADMA support

DRA7xx/AM57xx:
* BBAI board support
* Clean up of net platform code under board/ti

AM33/AM43/Davinci:
* Reduce SPL size for omap3 boards.
* SPL DT support for da850-lcdk
* PLL divider fix for AM335x

- stm32mp1: split SOC and board and cleanup config

- Bring in Simon Glass's series that reduces what we have in <common.h>
  even more.

- Based on bionic-20200112 tag from Ubuntu
- Add graphviz (Heinrich)

Signed-off-by: Tom Rini <trini@konsulko.com>

Alifer Moraes authored 5 years ago and Stefano Babic committed 5 years ago

detail_board_ddr_info() is not used anywhere, so simply remove it.

This function is only used by Layerscape, not by i.MX.

This was detected by the following sparse warning:

board/toradex/colibri-imx8x/colibri-imx8x.c:104:6: warning: no previous
prototype for ‘detail_board_ddr_info’ [-Wmissing-prototypes]

Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>

Alifer Moraes authored 5 years ago and Stefano Babic committed 5 years ago

detail_board_ddr_info() is not used anywhere, so simply remove it.

This function is only used by Layerscape, not by i.MX.

This was detected by the following sparse warning:

board/toradex/apalis-imx8/apalis-imx8.c:92:6: warning: no previous
prototype for ‘detail_board_ddr_info’ [-Wmissing-prototypes]

Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>

Alifer Moraes authored 5 years ago and Stefano Babic committed 5 years ago

detail_board_ddr_info() is not used anywhere, so simply remove it.

This function is only used by Layerscape, not by i.MX.

This was detected by the following sparse warning:

board/freescale/imx8qxp_mek/imx8qxp_mek.c:115:6: warning: no previous
prototype for ‘detail_board_ddr_info’ [-Wmissing-prototypes]

Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>

Alifer Moraes authored 5 years ago and Stefano Babic committed 5 years ago

detail_board_ddr_info() is not used anywhere, so simply remove it.

This function is only used by Layerscape, not by i.MX.

This was detected by the following sparse warning:

board/freescale/imx8qm_mek/imx8qm_mek.c:102:6: warning: no previous
prototype for ‘detail_board_ddr_info’ [-Wmissing-prototypes]

Alifer Moraes authored 5 years ago and Stefano Babic committed 5 years ago

detail_board_ddr_info() is not used anywhere, so simply remove it.

This function is only used by Layerscape, not by i.MX.

This was detected by the following sparse warning:

board/advantech/imx8qm_rom7720_a1/imx8qm_rom7720_a1.c:110:6: warning: no previous
prototype for ‘detail_board_ddr_info’ [-Wmissing-prototypes]

Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>

Alifer Moraes authored 5 years ago and Stefano Babic committed 5 years ago

Include fdt_support.h header file to fix the following sparse warning:

board/freescale/imx8qm_mek/imx8qm_mek.c:116:5: warning: no previous
prototype for ‘ft_board_setup’ [-Wmissing-prototypes]

Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>

Alifer Moraes authored 5 years ago and Stefano Babic committed 5 years ago

Include fdt_support.h header file to fix the following sparse warning:

board/freescale/imx8qxp_mek/imx8qxp_mek.c:129:5: warning: no previous
prototype for ‘ft_board_setup’ [-Wmissing-prototypes]

Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>

Alifer Moraes authored 5 years ago and Stefano Babic committed 5 years ago

Add prototype to function spl_board_boot_device to fix the following
sparse warning:

board/freescale/imx8mm_evk/spl.c:26:5: warning: no previous prototype
for ‘spl_board_boot_device’ [-Wmissing-prototypes]

Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>

Alifer Moraes authored 5 years ago and Stefano Babic committed 5 years ago

Functions spl_dram_init() and power_init_board() are used only in
the scope of this file, so make them static to fix the following sparse
warnings:

board/freescale/imx8mm_evk/spl.c:40:6: warning: no previous prototype
for ‘spl_dram_init’ [-Wmissing-prototypes]

board/freescale/imx8mm_evk/spl.c:85:5: warning: no previous prototype
for ‘power_init_board’ [-Wmissing-prototypes]

Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>

Alifer Moraes authored 5 years ago and Stefano Babic committed 5 years ago

Functions fracpll_configure(), decode_intpll(), decode_fracpll(),
get_root_src_clk() and get_root_clk() are used only in the scope of this
file, so make them static to fix the following sparse warnings:

arch/arm/mach-imx/imx8m/clock_imx8mm.c:50:5: warning: no previous
prototype for ‘fracpll_configure’ [-Wmissing-prototypes]
arch/arm/mach-imx/imx8m/clock_imx8mm.c:271:5: warning: no previous
prototype for ‘decode_intpll’ [-Wmissing-prototypes]
arch/arm/mach-imx/imx8m/clock_imx8mm.c:418:5: warning: no previous
prototype for ‘decode_fracpll’ [-Wmissing-prototypes]
arch/arm/mach-imx/imx8m/clock_imx8mm.c:483:5: warning: no previous
prototype for ‘get_root_src_clk’ [-Wmissing-prototypes]
arch/arm/mach-imx/imx8m/clock_imx8mm.c:527:5: warning: no previous
prototype for ‘get_root_clk’ [-Wmissing-prototypes]

Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>

Flavio Suligoi authored 5 years ago and Stefano Babic committed 5 years ago

Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>

Flavio Suligoi authored 5 years ago and Stefano Babic committed 5 years ago

Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>

Alifer Moraes authored 5 years ago and Stefano Babic committed 5 years ago

Add sys_proto.h header file to fix the following sparse warning:

board/freescale/imx8mm_evk/imx8mm_evk.c:59:5: warning: no previous
prototype for ‘board_mmc_get_env_dev’ [-Wmissing-prototypes]

Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>

Jorge Ramirez-Ortiz authored 5 years ago and Stefano Babic committed 5 years ago

The mux mode is embedded in the PAD definition and therefore there is
no need to repeat it in the PAD configuration value (more over since
this information will be masked out when the configuration value is
applied).

Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Reviewed-by: Fabio Estevam <festevam@gmail.com>

Flavio Suligoi authored 5 years ago and Stefano Babic committed 5 years ago

The imx8mm doesn't require the hdmi firmware.
Update also the fw version.

Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

Joris Offouga authored 5 years ago and Stefano Babic committed 5 years ago

With commit 0d52bab4 ("mx7dsabre: Enable DM_ETH")

Device Tree has been update and change pfuze3000 node

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>

Jorge Ramirez-Ortiz authored 5 years ago and Stefano Babic committed 5 years ago

On SPL enabled systems, the current s_init code (wdog, clock and ldo
init) is executed twice (by SPL and u-boot). This is not necessary and
might lead to boot issues (ie, starting PMC1 when it is already running).

Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Reviewed-by: Fabio Estevam <festevam@gmail.com>

Fabio Estevam authored 5 years ago and Stefano Babic committed 5 years ago

Currently the following build warning is seen:

===================== WARNING ======================
This board does not use CONFIG_DM_ETH (Driver Model
for Ethernet drivers). Please update the board to use
CONFIG_DM_ETH before the v2020.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
===================================================

Since the mx7ulp-evk board does not have networking support, explicitly
disable networking.

Signed-off-by: Fabio Estevam <festevam@gmail.com>

Anatolij Gustschin authored 5 years ago and Stefano Babic committed 5 years ago

Fix dtb building warnings:
Warning (cooling_device_property): /thermal-zones/cpu-thermal0/cooling-maps/map0:
Missing property '#cooling-cells' in node /cpus/cpu@0 or bad phandle (referred from cooling-device[0])

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>

Arkadiusz Karas authored 5 years ago and Stefano Babic committed 5 years ago

Add iMX6ULL VisionSOM SoM and VisionCB-RT-STD evaluation board support.
The SoM has an iMX6ULL, 512 MiB of DRAM and microSD slot. The carrier
board has Ethernet, USB host port, USB OTG port.

Signed-off-by: Arkadiusz Karas <arkadiusz.karas@somlabs.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>

Marek Vasut authored 5 years ago and Stefano Babic committed 5 years ago

Enable SPL SDP fallback boot option in default build.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Stefano Babic <sbabic@denx.de>

Marek Vasut authored 5 years ago and Stefano Babic committed 5 years ago

The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID
register. Print the correct identification of the PMICs.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Stefano Babic <sbabic@denx.de>

Marek Vasut authored 5 years ago and Stefano Babic committed 5 years ago

Simplify the uSDHC4 eMMC controller setup. This is the only eMMC
present on the system and only controller that is used, so drop
the extra logic.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>

Signed-off-by: Stefano Babic <sbabic@denx.de>

Dario Binacchi authored 5 years ago and Lokesh Vutla committed 5 years ago

In locked condition CLKOUT = CLKINP * [M / (N + 1)].

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Add slack to the clock frequency parameters passed to firmware within
clk_set_rate. min-freq is changed to 0 and max-rate is changed to
ULONG_MAX. This fixes certain issues with pll clock rounding when the
firmware is not able to set the frequency exactly to the target, the
current implementation fails if the available frequency is even 1Hz off
the target. With the change, the firmware still tries its best to set
the frequency as close as possible to the target.

Reported-by: Vishal Mahaveer <vishalm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Take over TI maintainership from Tom.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Vignesh Raghavendra authored 5 years ago and Lokesh Vutla committed 5 years ago

Enable USB keyboard to be used as input device at U-Boot prompt. Both
serial and USB keyboard will be active inputs simultaneously.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Vignesh Raghavendra authored 5 years ago and Lokesh Vutla committed 5 years ago

Enable configs related to USB Host mode, Peripheral mode and DFU.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Vignesh Raghavendra authored 5 years ago and Lokesh Vutla committed 5 years ago

Add env variables that set up dfu_alt_info for MMC/EMMC/OSPI. This
is required to allow update of firmware on these media.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Vignesh Raghavendra authored 5 years ago and Lokesh Vutla committed 5 years ago

Add pinmux for USB1 and enable it as a peripheral port in U-Boot
specific dtsi since U-Boot does not support OTG.
Disable USB0 as its not available on the baseboard.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Vignesh Raghavendra authored 5 years ago and Lokesh Vutla committed 5 years ago

Add support for USB0 and USB1 instances on the AM6 SoC.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Vignesh Raghavendra authored 5 years ago and Lokesh Vutla committed 5 years ago

AM654 SoC has USB2 PHY which is similar to existing USB2 PHYs on OMAP
SoCs. Add support for the same.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Vignesh Raghavendra authored 5 years ago and Lokesh Vutla committed 5 years ago

Below warning is seen when this driver is built for devices with 64 bit
physical address space.

drivers/phy/omap-usb2-phy.c: In function ‘omap_usb2_phy_probe’:
drivers/phy/omap-usb2-phy.c:187:20: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
   priv->phy_base = (void *)base;
                    ^
Fix this by using dev_read_addr_ptr() instead of dev_read_addr().

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Vignesh Raghavendra authored 5 years ago and Lokesh Vutla committed 5 years ago

AM654 has DWC3 USB controller that is very similar to other TI SoCs. Add
a new compatible to enable the same.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>